Überblick

125W 2/4 Channel Digital DSP Amplifier CXA2125

Der Leistungsverstärker CXA2125 wurde entwickelt, um eine konfigurierbare und zuverlässige Komplettlösung für private, kommerzielle und Unterhaltungsanwendungen zu bieten.

CXA2125-Verstärker sind Leistungsverstärker mit eingebautem DSP und sind bedingt kaskadierbar.
Sie besitzen halbe Rack-Breite und belegen 1HE, es können sowohl herkömmliche Lautsprecher mit niedriger Impedanz (Lo-Z, 4Ω bis 16Ω) als auch hochohmige (Hi-Z, 70V/100V) Lautsprecher betrieben werden. Sie bieten vier analoge Eingänge, einen digitalen Stereo-S/PDIF-Eingang und entweder vier Ausgänge (Lo-Z-Modus) oder zwei Ausgängen (Hi-Z-Modus). Die CXA-Verstärker verfügen außerdem über eine automatische Leistungsteilung, die es ermöglicht, die Leistung im Lo-Z-Modus proportional auf zwischen 2 Endstufenmodulen aufzuteilen.

Produktdetails

  • 4-channel Class-D digital power amplifier
  • Rated power: 4 x 60 W
  • Transformerless output stage for direct drive of 70 V/100 V in bridge mode or low impedance systems in dual mono mode
  • Power sharing function
  • Energy-saving switching power supply
  • Integrated DSP section with comprehensive preamp, equaliser and mix functions in all inputs, routing, priority and compressor functions in the zones and fully-fledged speaker processing including FIR:filters and preset functions in the output channels, SPDIF aux output
  • Configuration/control via network/web interface
  • Front LEDs for status display
  • GPIO interface
  • Lightweight half 19" housing with 1U
  • Compatible with Cloud CDR-3 series wall panels
Power output
Output power
4 x 60 W @ 4/8 Ohm, 2x 125 W @ 70/100V
Frequency response
20 Hz to 20 kHz (+/- 0.025 dB (8 Ohm load, 3 dB below rated power))
Distortion factor
0.05 % THD+N @ 20 Hz to 20 kHz (+/- 0.025 dB (8 Ohm load, 3 dB below rated power))
Noise
>106dB, (A-weighted, 20Hz-20kHz, 8Ω load)
Inputs
Connections
4x analogue unsym. cinch and sym. 3-pin Euroblock, 1x digital S/PDIF cinch
Outputs
Connections
2x amplifier output 4-pin Euroblock
General
GPIO connections
8-pin Euroblock
Power supply
100 to 240 V AC, 50 to 60 Hz
Status indicators
Status, Input, Output, Network, Wifi
Dimensions (W x H x D)
220 x 44 x 213 mm
Weight
2.0 kg