There' s no event, concert or tour without them: cable drums, cable ties, cable testers & co. are indispensable problem solvers for the small and large challenges of live productions and belong in every tool case. With our portfolio of accessories, we offer a wide selection of these professional helpers.
The CASY124 is a CASY module with a male XLR connector placed in an angle on the front side and a solderless terminal block on the backside. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis.
The BSD02 is a hinged blind panel with slam latch which can be installed to any 19” enclosure. This creates a fully closed rack cabinet while off ering easy and instant access inside the cabinet for service and maintenance.
The CASY044S is a modular stage box which can be fitted with 4 modules from the CASY range. The flexible and modular structure ensures a maximum versatility, allowing to adapt the system to each project's specific requirements. Possibilities are ranging from audio, video and data interconnection to power distribution, control panels, power supplies and many more.
The aluminum construction features pre-threaded hole inserts allowing module installation with a maximum of 4 units with a built-in depth up to 60 mm. It is fitted with a cable gland with strain relief accepting diameters in a range of 9 to 16 mm, which can be removed for assembly of a D-sized connector type (e.g. PowerCON). The sides are constructed out of cold-rolled steel protected with rubber shock bumpers perfect for all use and abuse. Modules can be fixed inside the unit using the included M3 screws. The overall construction is finished in a black (RAL9004) structured and scratch-resistant powder coating.
An adjustable (281 to 430 mm depth) 19” L-rail set made of 1,5mm and 3mm thick cold rolled steel finished with a black structured powder coating. The in-depth adjustable L-rails provide extra support when mounting heavy equipment. Universally usable but especially suited to use in combination with OPR series.
The CASY121 is a CASY module with a female XLR connector on the front side and a solderless terminal block on the backside. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis.
The RDx20x series of 19” rack drawers comes available in 1U, 2U and 3U unit heights with and without lock. The chassis is constructed of 1,5 mm thick cold rolled steel, while the tray is finished in 1,2 mm thick cold rolled steel. They feature full extension 3 section drawer rails, pushout holes on the back of the tray for cable insertion, a rubber anti slip liner, a full-width handle and optional back supports (RD2S) for increased load capacity (only 2U and 3U).
The CDM152 is a high-quality cable reel, featuring a steel tubular frame with a solid and strong drum constructed of high-quality and impact resistant materials. The drum dimensions of Ø 285 mm x 140 mm offers a capacity up to 130 meters of standard microphone (~ Ø 6.5 mm) and up to 65 meters of speaker cable (~ Ø 9.0 mm). Other present features such as the ergonomic grip, front flange with practical cable holder and blocking brake, makes it a practical tool for carrying any cable to any event or production!
The CASY167 is fitted with a NE8FAH Ethercon connector on the front side and a female RJ45 connector on the back. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis.
The ACT Series standard cable ties provide an excellent solution for standard fastening, wire bundling and cable organizing purposes. They are made out of UL Approved Nylon 66/94V-2, providing a corrosion resistant, well insulated, strong and durable solution. The different sizes and specifications will be appreciated by any installer. All of them come by 100 pcs in re-closable PE bags for easy usage.
The PSR269GS is a 19” power distribution unit, compliant to the ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. The PSR269 series come in 2 different models, a double switched power distribution unit with 15 French sockets (PSR269FS) and a double switched power distribution unit with 15 German sockets (PSR269GS). The construction of these units is made using black powder-coated aluminum fitted with steel 19” mounting ears on each side. The total height covers a single 19” rackspace, allowing it to be installed in any 19” housing or equipment rack. Input connections are made using a fixed 2.5 meter connection cable fitted with a male schuko (CEE 7/7) plug, while German (Type F - CEE 7/4) output sockets allow power distribution to fifteen devices. A chassis earth connection point is provided for easily connecting your rack/enclosure to mains earth, as required by safety regulations.
The ACT Series standard cable ties provide an excellent solution for standard fastening, wire bundling and cable organizing purposes. They are made out of UL Approved Nylon 66/94V-2, providing a corrosion resistant, well insulated, strong and durable solution. The different sizes and specifications will be appreciated by any installer. All of them come by 100 pcs in re-closable PE bags for easy usage.
The CASY032 is a modular on-wall chassis which can be fitted with 2 modules from the CASY range. The flexible and modular structure ensures maximum versatility, allowing the system to be adapted to project specific requirements. Possibilities range from audio, video and data interconnection to power distribution, control panels, power supplies and many more. The aluminum construction features pre-threaded hole inserts allowing module installation with a maximum of 2 units with a built-in depth up to 60 mm. It can be mounted on any wall or surface, while cable entry is possible through large access holes on the rear side. The sides are constructed out of ABS material with break-out points allowing cable entry through a duct or gland. Modules can be fixed inside the unit using the included M3 screws. The overall construction is finished in a black (RAL9004) structured and scratch resistant powder coating.
The IS series offers three models catering to 1 unit, 2 units, and 3 units rack mounting, providing you with a solution tailored to your specific requirements. Crafted from cold rolled steel with a robust plate thickness of 1.5 mm, these shelves are designed to meet the demands of modern rack assembly environments.
One of the standout features of the IS Series is its modular and flexible fixation system, allowing easy assembly for devices without standard 19” mounting ears. The enhanced usability extends beyond the conventional, with an increased width and a notable usable depth of 300 mm, providing you with more space to accommodate your equipment. In the 1 unit version a shorter version with a usable depth of 180 mm is also available.
Ventilation is a key consideration, and the IS Series addresses this with an improved cutout pattern for enhanced airflow, keeping your devices cool and functioning optimally. The shelves come with an optional half-width and quarter-width face plates, offering a customizable solution to suit your rack configuration needs. For added load capacity and stability, the IS Series offers an optional back support feature. This ensures that your equipment stays securely in place, even in demanding environments.
In the realm of cable management, the integrated cable lacing cutouts streamline the process, helping you maintain a clean and organized setup. The shelves are coated with a black (RAL9004) powder finish, boasting a fine structured finish that not only adds an aesthetic touch but also significantly improves scratch resistance.
The ACT Series standard cable ties provide an excellent solution for standard fastening, wire bundling and cable organizing purposes. They are made out of UL Approved Nylon 66/94V-2, providing a corrosion resistant, well insulated, strong and durable solution. The different sizes and specifications will be appreciated by any installer. All of them come by 100 pcs in re-closable PE bags for easy usage.
A 19” blind panel made of steel with a plate thickness of 1.5 mm and provided with a black (RAL 9004) structured powder coating. The panel is perforated with ventilation holes to help cool the stored equipment.
The BP108T is a 19" blind panel with 6 D-size holes and tension relief, made of steel with a plate thickness of 1.5 mm and provided with a black (RAL9004) structured powder coating. The blind panel is used to build in D-size connectors which will make connecting in and outputs easier.
The CASY104 module features one angled hole to fit a d-size connector. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis.
The CASY205 module features one hole to fit a G-size connector. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis.
The ACV Series are Re-usable cable ties which provide an excellent solution for temporary applications. They can be used for holding rolled-up cables together as well as standard fastening, wire bundling and cable organizing purposes.
Elevate your rack organization with this sleek and functional face plate designed specifically for the CAYMON ISx20 series rack shelves.
Crafted with precision and attention to detail, this quarter rack space face plate seamlessly integrates with your existing 19" ISx20 series standard shelf, providing a professional and polished appearance.
Whether you're a professional AV installer or a home audio enthusiast, the CAYMON face plate enhances the aesthetics of your rack while maintaining a streamlined and organized environment.
The CASY143 is a CASY module with a male speakON connector (NL4MP) placed in an angle on the front side and a solderless terminal block on the backside. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis.
