Racks, Cases & Stands
Professional equipment needs equal accommodation as well as safe transportation. With our case, rack and stand solutions, users will find professional companions for fixed and mobile installation use - from 19'' rack cabinets to flight cases and desktop housings all the way to laptop sleeves.
Sort by:
CAYMON
ALR30
An adjustable (281 to 430 mm depth) 19” L-rail set made of 1,5mm and 3mm thick cold rolled steel finished with a black structured powder coating. The in-depth adjustable L-rails provide extra support when mounting heavy equipment. Universally usable but especially suited to use in combination with OPR series.
Color:
Black
Color
CAYMON
RD320
The RDx20x series of 19” rack drawers comes available in 1U, 2U and 3U unit heights with and without lock. The chassis is constructed of 1,5 mm thick cold rolled steel, while the tray is finished in 1,2 mm thick cold rolled steel. They feature full extension 3 section drawer rails, pushout holes on the back of the tray for cable insertion, a rubber anti slip liner, a full-width handle and optional back supports (RD2S) for increased load capacity (only 2U and 3U).
Color:
Black
Color
%
EOL
CAYMON
CMA350
CMA350 is a Anti-shock mounting for XLR based gooseneck microphones. It makes sure that the installed microphone does not absorb the vibrations of its environment canceling out the noise these vibrations would produce.
CAYMON
PSR269GS
19" power distribution unit - German 6 x front sockets + 9 x rear sockets - Double switched
+1 Variants
CAYMON
PSR269GS
The PSR269GS is a 19” power distribution unit, compliant to the ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. The PSR269 series come in 2 different models, a double switched power distribution unit with 15 French sockets (PSR269FS) and a double switched power distribution unit with 15 German sockets (PSR269GS). The construction of these units is made using black powder-coated aluminum fitted with steel 19” mounting ears on each side. The total height covers a single 19” rackspace, allowing it to be installed in any 19” housing or equipment rack. Input connections are made using a fixed 2.5 meter connection cable fitted with a male schuko (CEE 7/7) plug, while German (Type F - CEE 7/4) output sockets allow power distribution to fifteen devices. A chassis earth connection point is provided for easily connecting your rack/enclosure to mains earth, as required by safety regulations.
Color:
Black
Color
CAYMON
BDR03
The BDR03 is a 19" panel with DIN rail which can hold up to 24 modules. The DIN rail is mounted on a separate bracket for easy installation. It offers the perfect solution for integrating DIN modules in a 19" rack. Integrated strain relief slots are provided on the backside of the panel together with an earth return rod. Both the bracket and front panel are made out of 1.5 mm thick steel finished with a black (RAL 9004) structured powder coating. The removable front panel with cutout comes included with the BDR03, allowing easy access to the front of the installed modules, this while maintaining a clear overview of your custom setup. Also included with the BDR03 are DIN rail blind covers (12 modules) for a clean finish when not all DIN slots are in use. These DIN rail blind covers, with article code BDP06, are also optionally available.
CAYMON
IS120S/B
The IS series offers three models catering to 1 unit, 2 units, and 3 units rack mounting, providing you with a solution tailored to your specific requirements. Crafted from cold rolled steel with a robust plate thickness of 1.5 mm, these shelves are designed to meet the demands of modern rack assembly environments.
One of the standout features of the IS Series is its modular and flexible fixation system, allowing easy assembly for devices without standard 19” mounting ears. The enhanced usability extends beyond the conventional, with an increased width and a notable usable depth of 300 mm, providing you with more space to accommodate your equipment. In the 1 unit version a shorter version with a usable depth of 180 mm is also available.
Ventilation is a key consideration, and the IS Series addresses this with an improved cutout pattern for enhanced airflow, keeping your devices cool and functioning optimally. The shelves come with an optional half-width and quarter-width face plates, offering a customizable solution to suit your rack configuration needs. For added load capacity and stability, the IS Series offers an optional back support feature. This ensures that your equipment stays securely in place, even in demanding environments.
In the realm of cable management, the integrated cable lacing cutouts streamline the process, helping you maintain a clean and organized setup. The shelves are coated with a black (RAL9004) powder finish, boasting a fine structured finish that not only adds an aesthetic touch but also significantly improves scratch resistance.
CAYMON
BP108T
The BP108T is a 19" blind panel with 6 D-size holes and tension relief, made of steel with a plate thickness of 1.5 mm and provided with a black (RAL9004) structured powder coating. The blind panel is used to build in D-size connectors which will make connecting in and outputs easier.
CAYMON
PR212
The PR206 is a professional 19” metal rack compliant to ANSI/EIA RS-310D, DIN41491, IEC 60297 standards. The rack comes in a flat pack as DIY kit. It is a solid construction with a 1.5 mm thick cold rolled, steel frame and plates, finished with a black (RAL9004) fine structured powder coating. The rack is provided with punched rack profiles for use with snap-in cage nuts on the front side and stores up to 12 units. The rear panel can be screwed off for easy installation and has a cable entrance on the bottom. Optional available wheels provide mobility to the equipment.
Color:
Black
Color
CAYMON
SPR642
The SPR642 is a professional 19” rack compliant to the ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. A cold rolled steel 2 mm thick frame and 1,2 mm thick plates provides a solid and stable construction making it suitable for heavy equipment, storing up to 42 units inside. The SPR642 comes fully assembled including 50 mm wheels for easy moving and adjustable feet for fixing and leveling once correctly positioned. The 19” mounting profile with punched square holes for use with snap-in cage nuts in combination with the printed unit measurement indicators ensure an easy fitting of the equipment. Adjustable 19 “ profiles provide great flexibilty for installing equipment depending on its depth. Both front and rear doors are fitted with a standard keylock.
CAYMON
WPR406R
The WPR406R is a professional 19” wall mount metal rack compliant to ANSI/EIA RS-310D, DIN41491, IEC 60297 standards. It is a solid construction with a cold rolled steel 1,5 mm thick frame and 1,2 mm thick plates. The WPR406R comes fully assembled and can easily be mounted on the wall. The 19” mounting profile with punched square holes for use with snap- in cage nuts in combination with the printed unit measurement indicators ensure easy fitting of the equipment. The tempered smokey grey glass door is fitted with a keylock to keep the equipment only accessible for authorized persons. The removable sides and back panel allow easy installing and cabling of the equipment while the in depth adjustable 19” profiles provide great flexibility for installing equipment depending on its depth.
Color:
Black
Color
CAYMON
IS2FQ/B
Elevate your rack organization with this sleek and functional face plate designed specifically for the CAYMON ISx20 series rack shelves.
Crafted with precision and attention to detail, this quarter rack space face plate seamlessly integrates with your existing 19" ISx20 series standard shelf, providing a professional and polished appearance.
Whether you're a professional AV installer or a home audio enthusiast, the CAYMON face plate enhances the aesthetics of your rack while maintaining a streamlined and organized environment.
productBadge.normal
CAYMON
HPR509
The HPR509 is a professional 19” double section wall rack cabinet which complies to ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. It ensures maximum installation, connectivity and maintenance ease storing up to 9 units of 19” equipment. The solid construction made of an 1.5 mm thick steel frame and 1.2 mm thick plates is finished with a black (RAL9004) fine structured powder coating. It provides a stable and secure installation while the double section structure allows easy access to the rear side of the equipment. The tempered smokey glass front door is reversible and secured with a key lock which keeps the equipment accessible for authorized persons only. Other present features are removable sides and in depth adjustable 19” profiles with unit measurement indicators and punched square holes for use with snap-in cage nuts.
Color:
Black
Color
CAYMON
SPR8842
The SPR8842 is a professional 19” rack compliant to the ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. A cold rolled steel 2 mm thick frame and 1,2 mm thick plates provides a solid and stable construction making it suitable for heavy equipment, storing up to 42 units inside. The SPR842 comes fully assembled including 50 mm wheels for easy moving and adjustable feet for fixing and leveling once correctly positioned. The 19” mounting profile with punched square holes for use with snap-in cage nuts in combination with the printed unit measurement indicators ensure an easy fitting of the equipment. Adjustable 19 “ profiles provide great flexibilty for installing equipment depending on its depth. Both front and rear doors are fitted with a standard keylock.
The SPR8842 comes with a tempered glass front door and steel rear door. The swing handle with cylinder lock safely locks the equipment inside. The width of 800 mm offers additional space for the installation of accessories and cable management systems, while guaranteeing an optimal convenience for installation and maintenance of the equipment.
Color:
Black
Color
CAYMON
PSR109G
The PSR1x9Gx are 19” power distribution units, compliant to the ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. They come in three different models, without a switch (PSR109G), with an illuminated switch on the socket side (PSR109GS) or with an illuminated switch on opposite of socket side (PSR119GS). The construction is made using black powder coated aluminum fitted with steel 19” mounting ears on each side. The total height covers a single 19” rackspace, allowing it to be installed in any 19” housing or equipment rack. Using the rotatable side ears, wall mounting is also made possible. Input connections are made using a fixed 2.5 meter connection cable fitted with a male schuko (CEE 7/7) plug, while German (Type F - CEE 7/4) output sockets allow power distribution to nine devices. A chassis earth connection point is provided for easily connecting your rack/enclosure to mains earth, as required by safety regulations.
Color:
Black
Color
CAYMON
SPR60LR
A 19” L-Rail set made of 1,2 mm thick cold rolled steel with a black structural powder coating. The rail provides extra support when mounting heavy equipment and the mounting distance can be adjusted to your needs. For use with SPR600 and OPR3xxA series only.
CAYMON
NPR404
The NPR404 is a professional 9.5”/10.5" wall mount metal rack designed to accommodate 'half rack' sized devices such as AV, IT or telecommunication equipment. The solid construction made of an 1.5 mm thick steel frame and 1.2 mm thick plates is finished with a black (RAL9004) fine structured powder coating. It stores up to 4 units of 9.5”/10.5" equipment, comes fully assembled and can easily be mounted on the wall. The mounting profile with punched square holes for use with snap-in cage nuts is in depth adjustable and reversible between 9.5" and 10.5" installation width. The tempered glass front door is reversible and secured with a key lock which keeps the equipment accessible for authorized persons only. Other present features are removable sides and printed unit measurement indicators.
Color:
Black
Color
CAYMON
PSR119GS
The PSR1x9Gx are 19” power distribution units, compliant to the ANSI/EIA RS-310D, DIN41491 and IEC60297 standards. They come in three different models, without a switch (PSR109G), with an illuminated switch on the socket side (PSR109GS) or with an illuminated switch on opposite of socket side (PSR119GS). The construction is made using black powder coated aluminum fitted with steel 19” mounting ears on each side. The total height covers a single 19” rackspace, allowing it to be installed in any 19” housing or equipment rack. Using the rotatable side ears, wall mounting is also made possible. Input connections are made using a fixed 2.5 meter connection cable fitted with a male schuko (CEE 7/7) plug, while German (Type F - CEE 7/4) output sockets allow power distribution to nine devices. A chassis earth connection point is provided for easily connecting your rack/enclosure to mains earth, as required by safety regulations.
Color:
Black
Color
