Our accessory solutions offer more options for everyday installation use. The portfolio includes brackets for custom-fit speaker mounting, power supplies, charging stations and signal splitters, as well as essential helpers and problem solvers for both small and large AV projects.
The ceiling mounting kit enables secure installation of the BFM2 unit on suspended or solid ceilings. It features a design that allows PoE or P-Link cables to pass through the mounting structure, ensuring neat and efficient wiring directly into the BFM2 device. The kit is fully compatible across generations, supporting both 1st Gen BFM and 2nd Gen BFM2 units interchangeably.
The CASY044 is a modular stage box which can be fitted with 4 modules from the CASY range. The flexible and modular structure ensures a maximum versatility, allowing to adapt the system to each project's specific requirements. Possibilities are ranging from audio, video and data interconnection to power distribution, control panels, power supplies and many more. The aluminum construction features pre-threaded hole inserts allowing module installation with a maximum of 4 units with a built-in depth up to 60 mm. It is fitted with a cable gland with strain relief accepting diameters in a range of 9 to 16 mm, which can be removed for assembly of a D-sized connector type (e.g. PowerCON). The sides are constructed out of cold-rolled steel and modules can be fixed inside the unit using the included M3 screws. The overall construction is finished in a black (RAL9004) structured and scratch resistant powder coating.
The ceiling mounting kit enables secure installation of the BFM2 unit on suspended or solid ceilings. It features a design that allows PoE or P-Link cables to pass through the mounting structure, ensuring neat and efficient wiring directly into the BFM2 device. The kit is fully compatible across generations, supporting both 1st Gen BFM and 2nd Gen BFM2 units interchangeably.
The ceiling mounting kit enables secure installation of the BFM2 unit on suspended or solid ceilings. It features a design that allows PoE or P-Link cables to pass through the mounting structure, ensuring neat and efficient wiring directly into the BFM2 device. The kit is fully compatible across generations, supporting both 1st Gen BFM and 2nd Gen BFM2 units interchangeably.
This rack mount unit accommodates up to 10 Netvio JP4 Series devices, including encoders, decoders, and the IP-JP4-CL-10 controller, within just 6U of rack space. It features a heavy-duty steel chassis with a powder-coated finish for durability. The design includes mounting hardware, alignment brackets, and optimized spacing for efficient cable management and airflow, ensuring a professional and organized installation.
The CASY124 is a CASY module with a male XLR connector placed in an angle on the front side and a solderless terminal block on the backside. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis.
The MBK2xx mounting brackets are especially designed for mounting the HS series 2-Way Horn speakers. Using these mounting brackets, these horn speakers can be mounted on any ceiling, pole or other position, while aiming the loudspeakers into the desired direction. They are constructed of steel with a thickness of 4 mm containing a zinc-plated finish preventing oxidation, while the U-shaped profile of the base increases the stability of the speakers. The bracket comes with the necessary parts, such as bolts, nuts, washers and speaker attachments ensuring safe and secure mounting.
The CASY044S is a modular stage box which can be fitted with 4 modules from the CASY range. The flexible and modular structure ensures a maximum versatility, allowing to adapt the system to each project's specific requirements. Possibilities are ranging from audio, video and data interconnection to power distribution, control panels, power supplies and many more.
The aluminum construction features pre-threaded hole inserts allowing module installation with a maximum of 4 units with a built-in depth up to 60 mm. It is fitted with a cable gland with strain relief accepting diameters in a range of 9 to 16 mm, which can be removed for assembly of a D-sized connector type (e.g. PowerCON). The sides are constructed out of cold-rolled steel protected with rubber shock bumpers perfect for all use and abuse. Modules can be fixed inside the unit using the included M3 screws. The overall construction is finished in a black (RAL9004) structured and scratch-resistant powder coating.
The TRM series are 70/100V line transformers that can be optionally implemented in the passive variants of the VEXO series. Installation is done by removing the backplate of the VEXO series (passive variants only) and replacing it with a 70/100V backplate on which the module is integrated. Like this, the high-performance loudspeaker can be implemented in 70/100V systems.
The optional CS-IP66 plate is required to conform the passive versions of Clouds CS-S8/10/12 Surface Speakers to full IP66 outdoor weatherproof standard. The plate fixes with 6 x 6m hex-head bolts, enclosing the rear side of all CS-S Series speakers. Made of powder coated aluminium with waterproof cable glands and water-tight sealing gasket.
The CASY121 is a CASY module with a female XLR connector on the front side and a solderless terminal block on the backside. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis.
The CXL-46T is an internal 120W 70/100V transformer which can be added to any of the non-T versions of the 46/120 Series to provide 70/100V output from a single zone (or any number of zones) to a maximum of four. Fitting and connection is very simple and can be retro-applied to the non-T versions of the 46/120 or 46/120Media to provide 70/100V output options.
The CDI-CA2 Dante network card is a retrofit option for all CA Series digital power amplifiers, and allows the amplifier to accept inputs directly from an Audinate Dante audio network.
This card provides up to two channels of low-latency digital audio via a Dante or AES67 network, channel subscriptions are made using Audinate’s Dante Controller software. The card also runs Dante v4.2 firmware, which gives compatibility with Dante Domain Manager (DDM).
The CDM152 is a high-quality cable reel, featuring a steel tubular frame with a solid and strong drum constructed of high-quality and impact resistant materials. The drum dimensions of Ø 285 mm x 140 mm offers a capacity up to 130 meters of standard microphone (~ Ø 6.5 mm) and up to 65 meters of speaker cable (~ Ø 9.0 mm). Other present features such as the ergonomic grip, front flange with practical cable holder and blocking brake, makes it a practical tool for carrying any cable to any event or production!
The CASY167 is fitted with a NE8FAH Ethercon connector on the front side and a female RJ45 connector on the back. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis.
The U-Bracket design allows for either vertical or horizontal wall/ceiling mounting of 108HTH or 208 HTC speakers. It is designed for a high safety margin and is made of 316grade (marine-grade) stainless steel that is compatible with both marine/ocean front and cruise ship applications, as well as direct weather inland applications and indoor installations.
The MBS1xx is a series of installation accessories for use in combination with the AUDAC S-Box™ products range. This range includes a variation of small electronic products such as amplifiers, transformer boxes, converters, and many more.
In combination with the MBS1xx series, extended assembly possibilities are offered to allow them to be fixed underneath tables or desks, assembled above drop ceilings or mounted to 19” equipment racks. The mechanic construction for each of these products is identical, allowing a combined installation for various products.
The ACT Series standard cable ties provide an excellent solution for standard fastening, wire bundling and cable organizing purposes. They are made out of UL Approved Nylon 66/94V-2, providing a corrosion resistant, well insulated, strong and durable solution. The different sizes and specifications will be appreciated by any installer. All of them come by 100 pcs in re-closable PE bags for easy usage.
Connection cable with dual steel core, snap hook & open ends - 7 meter. For use with the ALTI series speakers (not suited for ALTIxM series). This connection cable with two integrated steel cores is designed for suspension with an additional drop safety. Fixation is made through two snap-hooks on one end and a dual Gripple fixation on the other end.
The ACT Series standard cable ties provide an excellent solution for standard fastening, wire bundling and cable organizing purposes. They are made out of UL Approved Nylon 66/94V-2, providing a corrosion resistant, well insulated, strong and durable solution. The different sizes and specifications will be appreciated by any installer. All of them come by 100 pcs in re-closable PE bags for easy usage.
