It is what we experience through the senses that makes life meaningful. In fact, it can be said that through the qualities in speech and music we experience, we become familiar with the higher values of life. This is just one of the reasons why at AUDAC you will find a passion for sound. Each speaker, audio matrix or amplifier solution we develop expresses that same inspiration and quality that exceeds users’ expectations, making it no coincidence our success results from exploring new methods and ideas beyond conventional boundaries.
WaveDynamics™ quad-channel 100V power amplifier 4x 600 W
The PMQ series are professional 100V quad channel power amplifiers, providing a new standard for premium sound 100V amplification in public address applications. Their advanced features and availability in different output powers provide an enormous flexibility for numerous applications.
The PMQ600 is a four channel Class-D 100V power amplifier with an output power of 600 Watt for each channel. The WaveDynamics™ DSP processor combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration.
Acoustics can be optimized using the filters selectable between Low / High & Band Pass and the 7-Band equalizer both with adjustable frequencies and Q-factor. Other provided functions are delay and dynamic bass boost. These settings can be custom configured using the front panel of the amplifier, whereby access can be given on two different levels (User & Administrator) using password or USB-key protection.
Configuration is made simple by the loudspeaker presets and full system configurations which can be selected from a library and uploaded with a USB flash drive. This ensures the best acoustical performance with a ‘bullet-proof’ loudspeaker protection.
A great input flexibility and source compatibility is offered by the input selection matrix and the XLR and terminal block signal connections. System integration is made easy using the RS-232 control port. Optional Dante™ interface is available for the WaveDynamics™ amplifiers. The installation of this network interface allows receiving and sending of low latency, high quality audio over a standard Ethernet network.
Product Details
Lightweight class-D amplifier
4x 600 W RMS Power
XLR input & linkthrough connections
Terminal block output connections
RS232 control
Dante expansion port
Advanced DSP and loudspeaker management
2.5" LCD display with intuitive user interface
WaveDynamics™ speaker & set configurations
RMS Power
4 x 600 W
Frequency Response (+/- 3 dB)
50 Hz - 20 kHz
Signal / Noise
> 95 dB
THD+N (@ 1 kHz)
< 0.05% (1/2 Rated Power)
Crosstalk (@ 1 kHz)
> 70 dB
Technology
Class-D
Power Supply
Switching mode
Power Operating
230 ~ 240 V AC / 50 ~ 60 Hz
Inputs Sensitivity
-30 dB - +5 dB
Input Impedance
10 kΩ balanced
Common mode rejection ratio
70 dB
Damping factor
> 200
Protection
DC Short circuit, Over heating, Over load, Signal limiting, Power limiter
Access
User & Administrator level (Through password and USB-key protection)
The ANI44XT is a Dante audio network interface for installation into WaveDynamicsTM series amplifiers with four input and four output channels. The installation of this optional module allows these amplifiers to be integrated into any Dante enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more. A true plug & play solution is created when linking multiple Dante enabled devices with each other on a standard IP network. It offers self-configuring solutions by using DHCP configuration, while the connection can be made to any existing 100 Mbit or 1 Gbit network infrastructure. Bidirectional signal transmissions with a sampling frequency of 48 kHz and a bit depth of 24 bit are simultaneously possible on all in and output channels while guaranteeing an incredibly low latency with a maximum up to 5 ms. (depending on the network occupation). The network connection is implemented using an Ethercon compatible connector, allowing connection using standard RJ45 or ruggedized Ethercon connections in professional applications. The ANI44XT comes delivered as an installation kit, including all required accessories for integration into the amplifier chassis. Installation shall be performed by qualified technicians.
The updated ANI44XT will have new functionalities like an updated power supply with much better performance in terms of noise and interference sensitivity and compatibility with the AES67 protocol and TouchLink.
This cable is especially designed for time-saving purposes when wiring-up equipment racks for complex installations. The connectors are fitted with a grip for easy plugging and unplugging which acts at the same time as a strain relief. The cable is on both sides terminated with a 2-pin Terminal Block connector with a pitch of 5.08 mm and has a conductor section of 2 x 1mm². This makes it suitable for many interconnections between devices such as Amplifiers and Matrix systems to Output Transformer Modules. Some examples of equipment using this kind of connections are the preamplifiers and amplifiers from the audio brand AUDAC.
This cable, with its terminal block connectors is especially designed to make it easier to install racks and do complex installations faster. Fitted with a plastic grip for easy plugging and unplugging, this signal cable features 2 x XLR Male to 2 x Terminal Block (3-pole Terminal block with 3.81mm pitch). This cable can be used for connecting a line signal, some examples of equipment using this kind of connections are the matrixes and amplifiers from the audio brand AUDAC.
This cable, with its terminal block connectors is especially designed to make it easier to install racks and do complex installations faster. Fitted with a plastic grip for easy plugging and unplugging, this signal cable features 2 x XLR Female to 2 x Terminal Block (3-pole Terminal block with 3.81mm pitch). This cable can be used for connecting a line signal, some examples of equipment using this kind of connections are the matrixes and amplifiers from the audio brand AUDAC.
The APC100MK2 is a configuration and control unit which can be used in combination with a wide variation of 'smart' AUDAC devices, ranging from matrix systems and mixers to paging consoles and wall panels. It features different types of communication ports, such as TCP/IP, RS-232 & RS-485. This way, it can communicate with every 'smart' device connected in your installation and establish the missing link between them. This makes the installers' life easier and time saving. Complex system configurations and updates can be made in a moment, as well as back-ups and duplicates. Specific files such as voice-file messages and screensavers can be uploaded without requiring no more than the APC100MK2 and a computer. An internal real-time clock allows synchronizations for time controlled events in external devices. (When synchronized with internet time server).
The AUDAC system manager software application allows the user to manage and control APC100MK2's functions together with full configuration functionalities for any 'smart' connected devices. (through TCP/IP, RS-232 or RS-485 In addition it can also be used as a standard gateway receiving serial communication and converting into TCP/IP format and reversed. This allows system integration for devices such as audio sources & power amplifiers without integrated network capabilities to be implemented into your automation system. A variety of optionally available mounting brackets for the AUDAC S-Box product range are allowing desk, closet or 19” equipment rack installation.
