Cloud Electronics
Sort by:
New
Cloud Electronics
VMA100
The Cloud VMA100 is a cost-effective mixer-amplifier designed for use across a wide range of commercial environments. It is engineered for simple installation and intuitive operation, while still offering a practical set of features and configuration options. Its compact form factor, 100 V direct drive output, and remote control capability make it an ideal solution for small hospitality and retail applications
New
Cloud Electronics
MX190
The MX190 is a 9-Channel mic/line mixer with 6 multi-purpose mic/line inputs, one dedicated microphone input and talk-over feature. All inputs feature EQ’s and Gain control. The balanced output is provided via Euroblock connector. Remote muting and emergency signal replay facilitate the use in installed sound systems.
Cloud Electronics
CVS-P62T
The Cloud CVS Contractor Series of cost-effective loudspeakers includes two pendant models specifically designed for high quality music reproduction. They are also suitable for speech and announcements and will find application in pubs and bars where a better quality of music audio is desirable. They are designed to be suspended in free space from any convenient point - from a solid ceiling or within an open ceiling structure: a complete set of suspension components is included with each loudspeaker. Horizontal dispersion is 360°.
The CVS-P62T is a 2-way coaxial design, with an internal crossover and a 6,5" LF driver and a 1" tweeter. The LF driver cone is made of polypropylene with a soft rubber surround; the HF driver is an aluminium dome tweeter design. The coaxial combination gives a pleasing musical response while preserving high speech intelligibility. The housing is constructed in polypropylene with high impact plastic baffle material. The internal 25/70/100 V transformer has five power tappings, plus the option for low-impedance operation (8 ohms). The power setting is selected by a rotary switch on the upper surface of the enclosure. Connections are made via a 4-pin Euroblock connector; a mating connector is supplied. The loudspeaker is supplied with a separate top cover which protects the connections and power selector switch from dust and debris after installation. The bottom face of the enclosure is sealed by an aluminium grille.
The CVS-P62T is available in black or white or can be repainted in any colour to match the décor of the installation.
Color:
White
Color
productBadge.normal
Cloud Electronics
CS-IP66
IP66 connection plate for passive versions of CS-S8, CS-S10 & CS-S12 speakers
+2 Variants
productBadge.normal
Cloud Electronics
CS-IP66
The optional CS-IP66 plate is required to conform the passive versions of Clouds CS-S8/10/12 Surface Speakers to full IP66 outdoor weatherproof standard. The plate fixes with 6 x 6m hex-head bolts, enclosing the rear side of all CS-S Series speakers. Made of powder coated aluminium with waterproof cable glands and water-tight sealing gasket.
Color:
Black
Color
Cloud Electronics
L-1
The L-1 is an Active Line Input Plate allowing for easy connection of a single Line Input within a remote Zone. The L-1 works with any Cloud product supporting a FACILITY PORT connector (Z-Series (MK2, MK3, MK4), 46-120-Series, 46-50, 46-80, MPA120MKll, MPA240MKll & select MA40/MA80 Mini Amps). Can be used with FPA-1 Adaptor if Facility Port connector is not available.
The L-1 is a cut-down derivative of the LM-2 Mic/Line Active Input Plate and is regularly used for presentations in seminar and conference suites, hotel ballrooms, multipurpose hospitality application, outdoor events, health and fitness application or lecturers in a classroom situation.
With a working range of 1 km via CAT5/6 cable, it provides balanced Line source from almost anywhere.
Color:
White
Color
Cloud Electronics
CXL-46T
The CXL-46T is an internal 120W 70/100V transformer which can be added to any of the non-T versions of the 46/120 Series to provide 70/100V output from a single zone (or any number of zones) to a maximum of four. Fitting and connection is very simple and can be retro-applied to the non-T versions of the 46/120 or 46/120Media to provide 70/100V output options.
Cloud Electronics
CDI-CA2
The CDI-CA2 Dante network card is a retrofit option for all CA Series digital power amplifiers, and allows the amplifier to accept inputs directly from an Audinate Dante audio network.
This card provides up to two channels of low-latency digital audio via a Dante or AES67 network, channel subscriptions are made using Audinate’s Dante Controller software. The card also runs Dante v4.2 firmware, which gives compatibility with Dante Domain Manager (DDM).
productBadge.normal
Cloud Electronics
46-80T
The Cloud 46-80 is a versatile, four-zone, rack-mounting (2U) audio mixing amplifier. It combines simple control of background music, microphone paging and power amplification for up to four zones in a single unit. It has extensive remote control facilities and is ideal for installation in premises such as pubs, bars, hotels, clubs, leisure and fitness centres, retail and other commercial premises, etc.
The 46-80 has four mono zone outputs, each driven by an 80 W (nominal rating) power amplifier stage: if less than four separate zones are required, the power stages may be paralleled by moving internal jumpers to permit dual stereo, quad mono or stereo + dual mono operation, with accordingly increased output power. The power stages have extensive protection circuitry to safeguard both the amplifier and loudspeakers.
New
Cloud Electronics
CS-S12AD
The Cloud CS-S12AD is the self-powered version with Dante of the CS-S Series of high quality 2-way loudspeakers for internal or external fixed installation in leisure and hospitality venues. They are an excellent choice to produce a “front of house” sound when higher levels and better quality musical reproduction is needed than can be achieved with typical small background music speakers.
Cloud Electronics innovative 12-inch surface mount speakers are a unique product perfect for numerous applications. The chassis is made of LLDPE (Linear low-density polyethylene) making it robust, lightweight and fully recyclable and ideal for outdoor as well as indoor use.
There are 4 variants of the CS-S12 in two colours:
CS-S12 - 8Ω Passive
CS-S12T - 70/100v
CS-S12A - self-powered
CS-S12AD - self-powered with Dante
Color:
White
Color
New
Cloud Electronics
CS-S12
The Cloud CS-S8 is the 12" version of the CS-S Series of high quality 2-way loudspeakers for internal or external fixed installation in leisure and hospitality venues. They are an excellent choice to produce a “front of house” sound when higher levels and better quality musical reproduction is needed than can be achieved with typical small background music speakers.
Cloud Electronics innovative 12-inch surface mount speakers are a unique product perfect for numerous applications. The chassis is made of LLDPE (Linear low-density polyethylene) making it robust, lightweight and fully recyclable and ideal for outdoor as well as indoor use.
There are 4 variants of the CS-S12 in two colours:
CS-S12 - 8Ω Passive
CS-S12T - 70/100v
CS-S12A - Active
CS-S12AD - Active Dante
Color:
White
Color
Cloud Electronics
DCM1e
The DCM1e is a Ethernet version of the popular DCM-1 Digital Control Zone Mixer. The addition of an Ethernet port on the rear panel of the DCM1e allows its in-built Ethernet web-server to be connected via an RJ-45 socket to an independent or existing wireless router. This feature means the DCM1e can be configured and controlled remotely by any mobile device or PC connected to the network. Using the web browser of any mobile End Users have "limited installer defined" controls via simple and intuitive interface pages. Installers have administrator status via "Configuration Options" which are password protected.
The DCM-1e provides any space-conscious sound installation with a high level of flexibility. It is ideal for contractors/installers who require flexible routing of line & mic signals.
The analogue zoner, with its simple-to-use digital control interface, can be controlled remotely via multiple LCD digital controllers. Optional active input modules extend the flexibility further. The DCM-1e is a microprocessor controlled multi zoner. With traditional "installer friendly" analogue I/O and signal path, but giving the contractor the flexibility and adaptability of digital control the DCM-1e has the traditional simplicity of Cloud products, with far greater functionality.
Cloud Electronics
MA40T
The MA40T is a very compact mono amplifiers designed for integration into audio and AV systems where de-centralised installation is advantageous. It is intended as “install-and-forget” components, and is small enough to be fitted into wall or ceiling voids or in any convenient location adjacent to projectors, flat screen displays or loudspeakers. A simple set of controls and configuration options makes it easy to integrate it into any audio system. IT is highly suitable for use with in-store digital signage, gallery and museum exhibits and fixed or mobile tour guide systems.
The MA40T is a mini amplifier providing 40W Output at 25V / 70V 100V. It is fitted with a paging microphone input with access contacts, a useful 70/100V line input option, a further two line inputs and a facility port input option allowing connection of the LM-2 wall input module and the new Cloud BT-1F Bluetooth Audio Wireless input module.
The MA40T is powered via a 12-24V power supply and offers music mute functionality to allow simple connection to fire alarm and other interfaces. It is highly flexible and suitable for use where the simple addition of another zone to an existing installation may be required.
Cloud Electronics
VA2120
The Cloud VA2120 is a cost-effective audio power amplifier for use in all types of commercial premises. It has been designed to be as simple to install and operate as possible.
The VA2120 has two channels with 120 W output power each. The amplifier can drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V loudspeaker distribution systems.
The amplifiers incorporates a limiter in each channel to protect the output stage and connected loudspeakers: this reduces excessive signal levels to ensure that clipping does not occur. Further protection circuitry disconnects the output if the maximum permitted internal temperature is exceeded, or if DC is detected at the output terminals.
All connections and controls are on the rear panel. Each channel has a preset level control and a switchable high-pass filter to mitigate the effect of transformer saturation at low frequencies when driving 25/70/100 V systems.
The front panel has a set of LEDs for each channel, confirming signal presence, excessive level and amplifier protection activity. Both models are forced-air cooled by fans mounted on the rear panel.
Cloud Electronics
CVS-C53T
The Cloud CVS Contractor Series is a low-cost range of quality loudspeakers for flush in-ceiling installation. They are ideal for background music and announcements in pubs, bars, hotels, offices and general circulation areas in most types of public building. The loudspeakers provide both good musical reproduction and a high level of speech intelligibility. They are very easy to install, requiring a single circular cut-out in the ceiling or ceiling tile: a cutting template is provided with each loudspeaker. The loudspeakers are fixed in place by four dog-leg clamps which can be actuated and tightened from below with a screwdriver.
All loudspeakers are constructed in lightweight ABS plastic with open back, infinite baffle characteristics. The CVS-C53T includes a 100 V-line transformer with three power tappings, plus the option for low-impedance operation. Connections are made via a multipin “Easy Connect” terminal block on a flying lead.
In common with the whole range, the cones are constructed from treated paper with a cloth surround. The CVS-C53T is also 5 1/4" design, fully coaxial with a 1/2" Mylar dome tweeter; and 24W transformer.
Color:
Black
Color
Cloud Electronics
CS-4TB-4P
Made from 3mm Galvanised Steel, the ceiling speaker Tile Bridge is primarily used to support ceiling speakers in suspended ceiling tiles, with the tile bridge taking the weight of the speaker and not the ceiling tile. Can also be used as support or bracing in thin plasterboard ceilings.
Cloud Electronics
PM1
The Cloud PM1 is a passive paging microphone for simple, single zone applications. It is ideal for use with any Cloud zoner and mixer-amplifier where single zone paging is required, but may also be used with any 3rd party zoners etc. Its heavy-duty moulded base and 300mm gooseneck mic give it a modern, attractive appearance, yet it is extremely robust for everyday use (ideal for use behind bars in restaurants and other licensed premises).
Connections are provided for wiring the mic audio signal and access contacts. The PTT button unmutes the mic and provides contacts (NO or NC) for the host device's access connector.
productBadge.normal
Cloud Electronics
Z8MK4
The Z8MK4 is a complete solution for multi-zone, multi functional venues. With the ability to accept an array of input sources such as MP3, Hardisc, CD, Video, Satellite etc., the Z8MK4 is an ideal choice. It has been developed specifically to meet these needs and can act as a user friendly master control for the entire sound system. Connecting the LM-2 or LM-2A active modules extends the versatility of the units allowing designers to provide simple, cost effective solutions to many customers' requirements that are difficult to achieve with other manufacturers' products.
The Z8MK4 offers direct connection of up to six music sources, two microphones and a paging mic, all of which can be selected to operate in up to eight different output zones, in any combination. The MK4 version includes RJ45 THRU/IN terminals for simple connection of Cloud Digital Paging Microphones and the addition of four balanced inputs add to the flexibility and increased installer friendliness.
productBadge.normal
Cloud Electronics
46-120MK2
The Cloud 46-120MK2 & 46-240 are versatile four-zone, rack-mounting (2U) audio mixer amplifiers. Designed and built to Cloud's respected standards, the 46 Series of mixer amplifiers are durable, robust and feature rich. It is ideal for any application where a powerful and versatile multi-zone mixer amplifier is required such as pubs, restaurants, bars, clubs and other entertainment locations, and also leisure and fitness centres, shops, offices, hotels, etc.
Cloud Electronics
CXA2250
CXA2250 power amplifier has been designed to provide configurable, consistent and reliable high performance audio power amplification for residential, commercial and entertainment applications.
CXA2250 amplifiers are half rack width, 1U format power amplifiers that can drive both conventional low impedance (Lo-Z, 4Ω to 16Ω) loudspeakers and high impedance (Hi-Z, 70V/100V) transformer coupled loudspeakers. They provide four analogue inputs, one stereo S/PDIF digital input, and either two or four outputs (Lo-Z mode), or one or two outputs (Hi-Z mode). CXA amplifiers also incorporate automatic power sharing technology that enables power to be shared proportionately as required between pairs of outputs in Lo-Z mode.
Cloud Electronics
CS-810BKT
The CS-810BKT is a custom designed U-Bracket for Clouds CS-S8 & CS-S10 Surface Speakers. This part fits all 8" & 10" varients including Passive, 100v, Active & Active Dante models.
Color:
Black
Color
Cloud Electronics
CXA2125
CXA2125 power amplifier has been designed to provide configurable, consistent and reliable high performance audio power amplification for residential, commercial and entertainment applications.
CXA2125 amplifiers are half rack width, 1U format power amplifiers that can drive both conventional low impedance (Lo-Z, 4Ω to 16Ω) loudspeakers and high impedance (Hi-Z, 70V/100V) transformer coupled loudspeakers. They provide four analogue inputs, one stereo S/PDIF digital input, and either two or four outputs (Lo-Z mode), or one or two outputs (Hi-Z mode). CXA amplifiers also incorporate automatic power sharing technology that enables power to be shared proportionately as required between pairs of outputs in Lo-Z mode.
productBadge.normal
Cloud Electronics
MPA120MK2
The Cloud MPA120MK2 is intended to provide a complete audio solution for Houses of Worship, retail outlets, hotels, licensed premises and other spaces where music, announcements and/or flexible paging are required. It combines the functions of a two-channel microphone mixer with full paging facilities, a six-input music source selector and a mono power amplifier in a single 1U unit.
The MPA120MK2 has six unbalanced stereo line inputs for music sources, and two balanced microphone inputs. Each microphone input has its own rear panel sensitivity control and front panel gain control, allowing multiple mics to be mixed together. The selected music source is mixed with the summed mic signals before being fed to the power amplifier stage.
The MPA120MK2 is compatible with the Cloud PM1 single-zone paging microphone, and may also be used for one of the zones supported by the Cloud PM4/8/12/16/4-SA/8-SA multizone paging microphones.
The power output stage is transformerless, and is capable of driving 70/100 V loudspeaker distribution systems directly. Rear panel DIP switches allow the output voltage and impedance to be selected, permitting the amplifier to be used to either drive low-impedance (4 or 8 ohm) loudspeakers or 70/100 V systems.
A particularly useful feature of the MPA120MK2 is the Facility Port; this allows a remote input module from the Cloud LM-2 Series (for wired sources) or BT-1 Series (for Bluetooth wireless sources) to be connected via easy-to-install screened Cat 5 cable. Microphones, and/or line sources such as radio mics, DJ mixers, MP3 players, laptops or other audio sources – including Bluetooth-equipped laptops, tablets and smartphones – can then be connected locally, simplifying the use of the area for presentations where portable audio sources are in use.
Cloud Electronics
CVA2500
Cloud Electronics, UK introduces its new range of energy efficient, class-leading amplifiers with the introduction of its new CVA-Series digital multi-channel digital amplifiers.
Flexible Output
All models in the CV-Digital series offer a total power output capability of 1KW, shared across the amplifier channels. This flexible approach allows a single, multi-channel amplifier, to drive loudspeaker systems differing in load size, in different areas of a building or venue, whilst optimising overall power output capability. (100v only)
Ethernet / DSP
A full suite of user configurable DSP functionality is on-board the CVA-Digital series, which includes input routing, multi-band parametric room and speaker optimisation EQ, output level control and limiting, and 1.5s of assignable delay. Amplifiers can be easily set up for multi-channel or parallel channel operation and bi-amping, with full control of crossover parameters.
Auxiliary Outputs
Providing the same DSP power as the normal amplifier channels, the auxiliary outputs can be configured as traditional slave outputs, or used as independent signal processing and routing channels.
Analogue and Digital Control
The CVA-Digital series amplifiers are compatible with standard Cloud RL Series remote level control plates. DSP parameters are accessible via RS-232 and Ethernet, for interfacing to third-party control systems. A 3-way GPIO port can be configured for external master mute and fault condition signalisation
