XTA Electronics
Sort by:
EOL
XTA Electronics
DPA80
The DPA Series has been designed to combine incredible audio power and performance with ultra-flexible connectivity for both remote control and audio. Exemplary audio processing is assured through the use of XTA’s DSP platform, and power amplifier capabilities are taken care of with high efficiency output stages and a generous power supply. DPA80 delivers over 2000W into 4 ohms per channels, and an 2x 4000W in bridge mode.
Accepting analogue, AES3 digital and optional Dante networked audio, the DPA Series can connect to any source and make it available over the network, as well as processing four additional channels with local analogue outputs to connect to non-DSP amplifiers. These auxiliary processed outputs can also be fed onto the network, and used by non-DSP DNA Series (and MC2 Delta Series) amplifiers that have Dante cards fitted, or by any other Dante enabled device.
Connectivity for remote control is covered by USB, Ethernet and RS485, with relay of either USB or Ethernet control via RS485 to work with legacy products. Configuration of the amplifier’s processing is through the industry standard AudioCore application, with tuning and monitoring of a network of DPA and Delta DSP amplifiers handled wirelessly by the dedicated DeltaDirect iPad app.
With a range of power levels available in the DPA Series, the non-DSP amplifiers can be networked to a single DPA model, creating a powerful, efficient system that’s easy to expand and adapt for use in live, install and everything in between.
EOL
XTA Electronics
DNA20-4T100V
The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
Fast rear panel switching allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.
Connect to an DPA amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
Within this 1U chassis, the DNA20 also features individual 70/100V line drive, an auto-standby power mode (with near-instant wake-up at
EOL
XTA Electronics
DNA120
The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
Accepting analogue, or optional Dante networked audio, this extra connectivity means that the all DNA models can also be used in installation systems which already have a centralized DSP core but require the flexibility of being able to pick up multiple channels of audio from a network.
With a range of power levels available in the DNA Series, the amplifiers can be networked to a single DPA model, creating a powerful, efficient system that’s easy to expand and adapt for use in live, install and everything in between.
Running cool in even the most difficult conditions, the DNA40 can deliver 2x 4600 W into 4 ohms with all channels driven, and an over 6000 W into 2.7 ohm loads, with outstanding distortion and noise figures right up to maximum output.
productBadge.normal
XTA Electronics
DP648-D
The DP648 builds on the legacy of the SIDD, C2, D2 processing, the XTA DP448 and DPA amplifiers. Providing ethernet control of this suite of IIR, FIR and dynamic processing essential for sound system management. The Dante/ AES67 option and flexible routing make it a comprehensive system processor, for overall system management or for traditional loudspeaker management.
The DP648 works as a system processor for any audio system, the XTA system scales for more advanced control when partnered with other XTA products. This includes the MX36 console/source switcher, DPA and DNA amplifiers which come with or without dsp.
The DP648 is equally suited to FOH racks as a system processor providing overall system management or located in amplifier racks as a more traditional crossover providing stereo 2, 3, 4+ way loudspeaker processing. The extensive XTA preset library makes this even easier.
To deliver this precise control the DP648 has the full suite of classical IIR filters, phase, all pass and delay on both inputs and outputs, input dynamic eq and an extensive loudspeaker preset library containing both IIR and FIR setting .
The DP648 has full front panel control, PC remote software control by Audiocore Amped edition. PC & MacOS control using globcon XTA MC² Edition. Full or partial locking of front controls is possible when required.
Multiple DP648s can be elegantly controlled by fast software grouping, inputs and or outputs can appear in up to 32 groups, making complex systems easy to manage. Grouping is effectively a virtual 32 output processor across compatible amplifiers and processors.
EOL
XTA Electronics
DNA80
The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
Accepting analogue, or optional Dante networked audio, this extra connectivity means that the all DNA models can also be used in installation systems which already have a centralized DSP core but require the flexibility of being able to pick up multiple channels of audio from a network.
With a range of power levels available in the DNA Series, the amplifiers can be networked to a single DPA model, creating a powerful, efficient system that’s easy to expand and adapt for use in live, install and everything in between.
Running cool in even the most difficult conditions, the DNA40 can deliver 4x 2000 W into 4 ohms with all channels driven, and an substantial 2x 4000 W bridged (8 ohms), with outstanding distortion and noise figures right up to maximum output.
EOL
XTA Electronics
DPA100
The DPA Series has been designed to combine incredible audio power and performance with ultra-flexible connectivity for both remote control and audio. Exemplary audio processing is assured through the use of XTA’s DSP platform, and power amplifier capabilities are taken care of with high efficiency output stages and a generous power supply. DPA100 delivers over 2700W into 4 ohms per channels, and an 2x 7000W in bridge mode.
Accepting analogue, AES3 digital and optional Dante networked audio, the DPA Series can connect to any source and make it available over the network, as well as processing four additional channels with local analogue outputs to connect to non-DSP amplifiers. These auxiliary processed outputs can also be fed onto the network, and used by non-DSP DNA Series (and MC2 Delta Series) amplifiers that have Dante cards fitted, or by any other Dante enabled device.
Connectivity for remote control is covered by USB, Ethernet and RS485, with relay of either USB or Ethernet control via RS485 to work with legacy products. Configuration of the amplifier’s processing is through the industry standard AudioCore application, with tuning and monitoring of a network of DPA and Delta DSP amplifiers handled wirelessly by the dedicated DeltaDirect iPad app.
With a range of power levels available in the DPA Series, the non-DSP amplifiers can be networked to a single DPA model, creating a powerful, efficient system that’s easy to expand and adapt for use in live, install and everything in between.
EOL
XTA Electronics
DPA40
The DPA Series has been designed to combine incredible audio power and performance with ultra-flexible connectivity for both remote control and audio. Exemplary audio processing is assured through the use of XTA’s DSP platform, and power amplifier capabilities are taken care of with high efficiency output stages and a generous power supply. DPA40 delivers over 1000W into 4 ohms per channels, and an 2x 2000W in bridge mode.
Accepting analogue, AES3 digital and optional Dante networked audio, the DPA Series can connect to any source and make it available over the network, as well as processing four additional channels with local analogue outputs to connect to non-DSP amplifiers. These auxiliary processed outputs can also be fed onto the network, and used by non-DSP DNA Series (and MC2 Delta Series) amplifiers that have Dante cards fitted, or by any other Dante enabled device.
Connectivity for remote control is covered by USB, Ethernet and RS485, with relay of either USB or Ethernet control via RS485 to work with legacy products. Configuration of the amplifier’s processing is through the industry standard AudioCore application, with tuning and monitoring of a network of DPA and Delta DSP amplifiers handled wirelessly by the dedicated DeltaDirect iPad app.
With a range of power levels available in the DPA Series, the non-DSP amplifiers can be networked to a single DPA model, creating a powerful, efficient system that’s easy to expand and adapt for use in live, install and everything in between.
EOL
XTA Electronics
DNA40
The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
Accepting analogue, or optional Dante networked audio, this extra connectivity means that the all DNA models can also be used in installation systems which already have a centralized DSP core but require the flexibility of being able to pick up multiple channels of audio from a network.
With a range of power levels available in the DNA Series, the amplifiers can be networked to a single DPA model, creating a powerful, efficient system that’s easy to expand and adapt for use in live, install and everything in between.
Running cool in even the most difficult conditions, the DNA40 can deliver 4x 1000 W into 4 ohms with all channels driven, and an substantial 2x 2000 W bridged (8 ohms), with outstanding distortion and noise figures right up to maximum output.
productBadge.normal
XTA Electronics
MX36
The MX36 has been designed to offer a uniquely simple solution to the long-standing problem of routing of multiple mixing consoles outputs to a speaker system / system processor. When you need to ensure that the show goes on, no matter what happens, you need backups of backups. You need a way to automatically switch between them when the signal path drops out. You need the ability to work with any sample rate on any AES input. To perform this across not just stereo pairs, but four channels simultaneously (L/R/FF/Sub).
No need for control software, no PC and no way for this to be tampered with remotely. You don’t want to be trusting this to an inferior sub-mixer or an over-specified, over-complex processor – get the right tool for the job.
The MX36 Mix Switcher is the solution. It handles four simultaneous inputs across three source types (analogue, AES and Dante – 36 individual inputs) and even when you’re not monitoring a source it will be. It will be checking the signal integrity and will auto-select the highest priority source seamlessly if anything fails. All you have to do is press A, B or C to choose what’s routed to the four outputs (all available in analogue, AES and Dante simultaneously with the option for external sync) - they can be summed if required.
In addition the MX36 features a stereo source direct input for background music and a mic input for announcements. A monitor section with headphone output can be used for montioring every individual feed from any source, plus checking the outputs and even verify the redundancy failovers beforehand.
To protect the settings against unwanted changes the MX36 controls can be locked.
XTA’s 25+ years of DSP knowledge ensures that the audio is treated with kid gloves through the best audio conversion.
productBadge.normal
XTA Electronics
DP648
The DP648 builds on the legacy of the SIDD, C2, D2 processing, the XTA DP448 and DPA amplifiers. Providing ethernet control of this suite of IIR, FIR and dynamic processing essential for sound system management. The Dante/ AES67 option and flexible routing make it a comprehensive system processor, for overall system management or for traditional loudspeaker management.
The DP648 works as a system processor for any audio system, the XTA system scales for more advanced control when partnered with other XTA products. This includes the MX36 console/source switcher, DPA and DNA amplifiers which come with or without dsp.
The DP648 is equally suited to FOH racks as a system processor providing overall system management or located in amplifier racks as a more traditional crossover providing stereo 2, 3, 4+ way loudspeaker processing. The extensive XTA preset library makes this even easier.
To deliver this precise control the DP648 has the full suite of classical IIR filters, phase, all pass and delay on both inputs and outputs, input dynamic eq and an extensive loudspeaker preset library containing both IIR and FIR setting .
The DP648 has full front panel control, PC remote software control by Audiocore Amped edition. PC & MacOS control using globcon XTA MC² Edition. Full or partial locking of front controls is possible when required.
Multiple DP648s can be elegantly controlled by fast software grouping, inputs and or outputs can appear in up to 32 groups, making complex systems easy to manage. Grouping is effectively a virtual 32 output processor across compatible amplifiers and processors.
EOL
XTA Electronics
DNA20
The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
Fast rear panel switching allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.
Connect to an DPA amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
Within this 1U chassis, the DNA20 also features individual 70/100V line drive, an auto-standby power mode (with near-instant wake-up at
EOL
XTA Electronics
DNA100
The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
Accepting analogue, or optional Dante networked audio, this extra connectivity means that the all DNA models can also be used in installation systems which already have a centralized DSP core but require the flexibility of being able to pick up multiple channels of audio from a network.
With a range of power levels available in the DNA Series, the amplifiers can be networked to a single DPA model, creating a powerful, efficient system that’s easy to expand and adapt for use in live, install and everything in between.
Running cool in even the most difficult conditions, the DNA40 can deliver 4x 2700 W into 4 ohms with all channels driven, and an substantial 2x 5400 W bridged (8 ohms), with outstanding distortion and noise figures right up to maximum output.
