WMI18 | White | WMI18/W

EOL

WMI18

Art.-Nr.: WMI18/W

Color: White

It is what we experience through the senses that makes life meaningful. In fact, it can be said that through the qualities in speech and music we experience, we become familiar with the higher values of life. This is just one of the reasons why at AUDAC you will find a passion for sound. Each speaker, audio matrix or amplifier solution we develop expresses that same inspiration and quality that exceeds users’ expectations, making it no coincidence our success results from exploring new methods and ideas beyond conventional boundaries.

Overview

Active audio transceivers XLR

The WMI are flush mountable Wall Microphone Input Units, which can be integrated into several kinds of installation materials for system integration. They are fitted with a Female XLR input connector on the front side and a terminal block connector on the rear side. The signal which is applied to the input connection is converted to a differential signal with increased voltage levels. This way, the signal is made insensitive to interference and noise and can be transferred over a long distance without any loss of quality. This allows reliable signal transmission up to 300 meters over CAT5E (or better) twisted pair cabling. A jumper on the rear side allows enabling of 15 Volts phantom power. It should be used in combination with a matching device on the receiver end.

Product Details

Active wall line input
Compatible with the MTX-Serie, AMP523MK2 und APG20
XLR-f microphone input
15 V phantom power
Integration with 45 x 45 mm installation materials
Terminal block connection
300 meter max. Cat5e cables length
Colors: Black (RAL9005), White (RAL9010)

XLR female connector

8-pin Euroblock, balanced

Mono audio transfer, differential with increased Voltage levels

UTP CAT5E (or better) (up to 300 m)

0.95 W - 40 mA / 24 V

15 V DC

45 x 45 x 50 mm (W x H x D)

ABS

Soft-touch painting

45 x 45 mm (AUDAC / Niko / Legrand)

Black (RAL9005) (WMI18/B), White (RAL9010) (WMI18/W)

Accessories

PROCAB

WB45S/FG

Flush mount box for double 45 x 45 mm wall panel - Hollow wall, single

PROCAB

WB45S/FG

The WB45S/FG wall boxes allow a flush mount in hollow walls and installation for one or two 45 x 45 mm standard sized products such as matrix control panels, volume controllers, connection plates, ...

EOL

PROCAB

CF45S

Cover frame, single 45x45mm

+2 Variants

Details

EOL

PROCAB

CF45S

The CF45 cover frames allow flush mount installation for any 45 x 45 mm standard sized product such as matrix control panels, volume controllers, connection plates, ... They come including a metal subframe(s) and are available in single (CF45S) and double (CF45D) unit size. They are available in black (/B) and white (/W).

Color: Black

Color

Details

PROCAB

CF45DH

Cover frame, dual 45x45mm, Verriegelungen

+2 Variants

PROCAB

CF45DH

Color: Black

Color

EOL

PROCAB

CF45D

Cover frame, dual 45x45mm

+2 Variants

EOL

PROCAB

CF45D

Color: Black

Color

PROCAB

WB45D/FG

Flush mount box for double 45 x 45 mm wall panel - Hollow wall, double

PROCAB

WB45D/FG

The WB45D/FG wall boxes allow a flush mount in hollow walls and installation for one or two 45 x 45 mm standard sized products such as matrix control panels, volume controllers, connection plates, ...

Related Products

productBadge.normal

AUDAC

MTX88

8-zone audio matrix

productBadge.normal

AUDAC

MTX88

The MTX88 is the eight-zone version of the MTX series, containing two balanced microphone inputs with priority function, phantom power possibility and three-band tone control. Four stereo line-level inputs are provided where to any line-level music source such as a CD-player, Tuner or MP3 player, ... can be connected. The other two inputs of the matrix are the additional wall panel inputs for both line and microphone signals. The MTX can be controlled by means of additional control panels, its fully functional web based interface or the iPhone/ iPad Remote app. The RS232 port makes the MTX compatible with any home & industrial automation systems supporting RS232. The front panel of the MTX shows a rotary button per zone with indication LEDs for accessing controls and settings. A built-in PFL loudspeaker makes it possible to pre-listen every channel without the need for a headphone. The balanced line-level zone output connections are performed using 3-pin Euro-terminal block connectors, each of them accompanied with an RJ45 connector for connecting additional wall panels for that zone. A 24 volts power connection makes it possible to keep the MTX running on emergency power, even if the main power is shut down.

productBadge.normal

AUDAC

MTX48

4-zone audio matrix

productBadge.normal

AUDAC

MTX48

The MTX48 is the four-zone version of the MTX series, containing two balanced microphone inputs with priority function, phantom power possibility and three-band tone control. Four stereo line-level inputs are provided to which any line-level music source such as a CD-player, tuner or MP3 player can be connected. The other two inputs of the matrix are the additional wall panel inputs for both line and microphone signals. The MTX can be controlled by means of additional control panels, its fully functional web based interface or the AUDAC Touch app. Using the freely available AUDAC Touch™ application for smart devices guarantees total system control and configuration from any device on any location and at any time. The RS232 port makes the MTX compatible with any home & industrial automation systems supporting RS232. The front panel of the MTX shows a rotary button per zone with indication LEDs for accessing controls and settings. A built-in PFL loudspeaker makes it possible to pre-listen every channel without the need for a headphone. The balanced line-level zone output connections are performed using 3-pin Euro-terminal block connectors, each of them accompanied with an RJ45 connector for connecting additional wall panels for that zone. A 24 volts’ power connection makes it possible to keep the MTX running on emergency power, even if the main power is shut down.

EOL

AUDAC

APG20MK2

Active audio transceivers RCA

EOL

AUDAC

APG20MK2

The APG20 is an audio receiver gateway converting databus transmitted audio signals to standard line and microphone level signals. The audio output of the APG20 can be fed to regular inputs on audio amplifiers, pre-amplifiers, mixers or many more. In combination with the matching input modules (WLI and WMI) it offers a solution for two channel audio transmission (line & microphone) covering distances up to 300 meters over standard UTP CAT5E (or better) cabling. Distances up to 600 meters can be achieved when applying additional power supplies. Due to the differential bus input with increased voltage levels, the received signals are insensitive for noise, interference and attenuation over the long transmission distance. This offers the appropriate solution for high quality audio transmissions in long distance applications while maintaining high quality audio reproduction. The bus input carrying both audio channels, an RS-485 data channel and 24 Volts distribution to the transmitter end is implemented using an RJ45 connector. The audio outputs are performed using dual RCA (line) and female XLR (microphone) connections. The XLR output is accompanied with a switch allowing selection between a -40 dB and 0 dB output level. The signals carried on the RS-485 pair of the databus are linked to an RJ45 output connection, allowing daisy chaining to the controlled equipment. A variety of optionally available mounting brackets for the AUDAC S-Box product range are allowing desk, closet or 19” equipment rack installation.