Overview

120 W / 100 V 4 Zone Integrated Mixer Amplifier

The 46-120T 4-Zone Integrated Mixer Amplifier provides individual source selection and volume control of up to six audio sources and two microphone inputs across four zones. Each zone is provided with 120W (4ohm) output or 120W (70/100V) output with internal transformer modules pre-installed.

Source selection and volume level control for each zone can be made via the front panel or remotely with the connection of up to four optional RSL-6 / RSL-6A Remote Source / Volume Select controllers, one for each zone. Analogue paging functionality to individual or all zones is available with the optional PM-Series paging microphones.

An automatic stand-by function reduces power consumption when not in use and a remote power down function makes the 46/120T suitable for numerous applications in Retail, Leisure, Education and Hospitality. The CDI-46 Optional Digital Interface Module provides digital paging connection via RJ-45, Ethernet Interface (TCP/IP) and RS-232 connection.
The 46/120T Mixer Amplifier provides a feature-packed single-box solution for four zone venues of all sizes.

Product Details

  • 4-Zone Mixer Amplifier
  • 120W Output per zone (4Ohm)
  • Pre-installed 120W 70/100W Internal Transformer
  • 6 Stereo Line-Inputs
  • 2 Microphone Inputs with priority option
  • Music on Hold / Utility Output
  • Remote Music Level and Source Selection via RSL-6 / RSL-6A
  • Facility Input via RJ-45 for LM-2 on Zone 1
  • Aux Out (Z1 + Z2)
  • Auto Stand-By Mode Function
  • Optional Digital Paging/RS-232/Ethernet (TCP/IP) Card (CDI-46)
  • Optional Paging Microphone with Chime Available
  • Optional EQ Module for Bose, Amina & Active Audio Loudspeakers
  • Remote Music Mute Function for Fire Alarm Interface
Line inputs
Frequency response
20 Hz to 20 kHz +0/-0.5 dB
THD + N
0.04% @ 1 kHz; 22 kHz bandwidth
Sensitivity
195 mV (-12 dBu) to 2.0 V (+8 dBu)
Input Gain control
20 dB range
Input impedance
47 kohms
Headroom
17 dB
Noise
-90 dB rms; 22 kHz bandwidth
Equalisation
HF: ±10 dB @10 kHz; LF: ±10dB @ 50 Hz
Microphone inputs
Frequency response
100 Hz -3 dB (fixed filter) to 20 kHz ±1 dB
Distortion
< 0.03% @ 1 kHz, 80 kHz bandwidth
Gain range
10 dB to 50 dB
Common Mode Rejection
70 dB typical
Input Impedance
3.3 kohms (balanced)
Headroom
17 dB
Noise
-127 dB EIN 22 Hz - 22 kHz (Rs = 150 ohms)
Equalisation
HF: ±10 dB @ 5 kHz LF: ±10 dB @100 Hz
Outputs
Low Impedance Outputs
120 W @ 4 ohm, 85 W @ 8 ohm
Low Impedance Frequency response
-1 dB @ 20 kHz, -0.5 dB @ 20 kHz
Low Impedance Distortion
< 0.04% @ 1 kHz, 80 kHz bandwidth
70/100 V output - Min. load
42 ohm @ 70 V, 83 ohm @ 100 V
70/100 V output - Frequency response
-3 dB @ 65 Hz (filter), -2.5 dB @ 20 kHz
70/100 V output - Distortion
< 0.06% @ 1 kHz, 80 kHz bandwidth
Amplifier Protection
Dynamic Clip Protection,VI Limiting, DC Offset, thermal & switch-on delay
Cooling
Variable speed DC fan
General
Power input
230 V ±5% (115 V ±5% by internal connection)
Power consumption
4,7 W (stand by), 440 W (max)
Dimensions (W x H x D)
482.6 mm (19") x 88 mm (2U) x 407 mm
Weight
11.75 kg, 15.75 kg (with CXL-46T Transformer)