Overview

Professional Audio Matrix Mixer, 256x256 audio channels

ClearOne’s CONVERGE MATRIX complete audio mixer and router that provides new opportunities for large-scale pro audio installations from 64x64 up to 512x512 audio channels, with the CONVERGE product line using Dante audio-over-IP networking technologies.

CONVERGE MATRIX is ideal for audio distribution applications like sound reinforcement, live announcements, pre-recorded audio, emergency information, background music, and paging.

Product Details

  • CONVERGE MATRIX supports up to 512x512 audio channel matrix
  • Comes with multiple channel size: 512x512, 256x256, 128x128, 64x64
  • Field-upgradable with expansion card (64x64, 128x128, 256x256) to double the channel count on the main unit
  • Dante networking technology for digital audio distribution
  • Audio channels mixing and routing
  • Works with all CONVERGE units & CONNECT Dante bridge and WS800 wireless mic system
  • Works with any 3rd party Dante products
  • Groups/zones configuration
  • Full matrix view, filtered matrix view based on groups/zones
  • Highly scalable, reliable, modular system adds flexibility
  • Complete system redundancy support for network and device
MIC/LINE INPUTS & OUTPUTS
Inputs
6
Outputs
6
Connectors
Euroblock
Frequency Response
20Hz – 22kHz @ +4dBu +/- 0.5dBu
Equivalent Input Noise (EIN)
-126dBu (20kHz BW, max gain, Rs = 150Ohms)
Dynamic Range
>105dB (20Hz – 20kHz @ 0dB)
Crosstalk (Mic/Line)
< -98dB (Channel to Channel)
Input Impedance (Mic/Line balanced line to ground)
2.2kOhms
Nominal Input Level
Adjustable -56dB to 0dB, 7dB step coarse gain
Maximum Input Level
-65dBu to 20dBu
Phantom Power
48V
Output Impedance (Mic/Line balanced)
95Ohms
Output Level
0dBu(Nominal), 20dBu (Max), -40dBu (Selectable)
DANTE
Audio channels
Up to 256x256 bidirectional @ 48kHz per pair of primary & secondary Dante ports
Sample rate
48kHz/96kHz
Primary & Secondary network
Gigabit Ethernet RJ45 connector
Expansion card
Up to additional 256 x 256 bidirectional @ 48kHz
EXPANSION BUS INPUT/OUTPUT
Proprietary Link In & Out ports
RJ45 Cat5e/Cat6 connection for Redundancy setup
OTHER PORTS
Ethernet
10/100 Ethernet Network Port RJ45, auto negotiation
Serial
RS-232, DB9 Female, Serial Command Protocol Only, 9600/19200/38400/115200 Baud; 8 bits, 1 stop, no parity
USB
Type B connector, USB 2.0 compatible
Control/Status
DB25 Female, 8 Open Collector Outputs, 12 Active High Inputs, 5VDC
Power Source
Device Identification
8 pin DID switch
GENERAL
Power
100-240V AC, 50/60 HZ, AC inlet
Operating Temperature
-10°C to 50°C
Dimensions (W x D x H)
43.2 x 27.3 x 4.4 cm