Overview

4x 2700 W Network Audio Power Amplifier with DSP

The Delta Series has been designed to combine incredible audio power and performance with ultra-flexible connectivity for both remote control and audio. Exemplary audio processing is assured through the use of XTA’s DSP platform, and power amplifier capabilities are taken care of with high efficiency output stages and a generous power supply. Powerful processing features, such as Dynmaic EQ, FIR filtering and Dante networking, work alongside unique enhancements including 4 local + 4 aux DSP channels, meaning a single Delta DSP amplifier can control a stereo 4-way system with no external processing.

Accepting analogue, AES3 digital and optional Dante networked audio, the Delta DSP amplifiers can connect to any source and make it available over the network, as well as processing four additional channels with local analogue outputs to connect to non-DSP Delta amplifiers. These auxiliary processed outputs can also be fed onto the network, and used by non-DSP Delta amplifiers that have Dante cards fitted, or by any other Dante enabled device.

Connectivity for remote control is covered by USB, Ethernet and RS485, with relay of either USB or Ethernet control via RS485 to work with legacy products. Configuration of the amplifier’s processing is through the industry standard AudioCore application, with tuning and monitoring of a network of Delta DSP amplifiers handled wirelessly by the dedicated DeltaDirect iPad app.

With a range of power levels available in the Delta Series, the non-DSP amplifiers can be networked to a single Delta DSP model, creating a powerful, efficient system that’s easy to expand and adapt for use in live, install and everything in between.

Running cool in even the most difficult conditions, the D100-DSP can deliver 4x 2700 W into 4 ohms with all channels driven, and an substantial 2x 5400 W bridged (8 ohms), with outstanding distortion and noise figures right up to maximum output. This power is maintained even with reduced mains voltages thanks to generous limiter headroom.

Product Details

  • Processing and Network Class D amplifier with DSP
  • 4x 2700 W at 4 ohms, bridgable: 2x 5400 W at 8 ohms
  • DSP functions: Delay, Parametic EQ, Dynamic EQ, FIR Filter, Crossover, Limiter
  • 4x analog Inputs + 4 digital AES3 inputs
  • Optional Dante Card available
  • Remote control and monitoring of a network of Delta DSP amplifiers via USB, RS485, Ethernet with AudioCore Software or free DeltaDirect iPad App
  • 32 dB gain
  • Dimensions: 88 (H) x 482(W) x 428(D) / 2 U
Number of channels
4
Input Impedance
20k ohms
Input CMRR (dB)
> 60
Damping Factor (1kHz, 8 ohms)
> 400
Output Power (per channel)
1400W / 8 ohms, 2700W / 4 ohms, 3700W / 2.7 ohms, 3500W / 2 ohms
Output Power
(bridged): 5400W / 8 ohms, 700W / 4 ohms
THD% (@1dB below max output)
< 0.08% ( 1kHz), < 0.1% (20Hz to 20kHz)
Gain
32dB
Sensitivity (for max power)
10.7dBu
Frequency Response
20Hz to 20kHz (+ 0/- 0.5dB)
ADC, DAC and DSP sample rate
96 kHz
AES accepted sample rates
32-192 kHz
Dynamic Range (20Hz-20kHz Unwtd)
> 114 dB
Distortion (@1kHz, +10dBm)
< 0.001 %
Signal Processing
Delay (up to 650mS inputs/outputs), Parametric Filters (8 Per input / 9 per output), FIR Filtering, Dynamic EQ, Limiter, Clip/D-max Limiter
Power supply
115/230AVC
Power Consumption
7.5 A , < 5W in standby), 20 A (max.)
Dimensions
88 (H) x 482(W) x 428(D) / 2 U
Weight
10.9kg