Overview

Fiber optic cable - lc/pc - lc/pc - duplex - LSHF

The FBL130 is a laser optimized OM3 type (50/125 μm) duplex hybrid multimode fiber optic patch cord suitable for 10 Gigabit network standards. Both ends are terminated with duplex LC/PC connectors, allowing direct connection between transmitting and receiving units. The cable construction is composed of low-smoke and halogen free materials finished with an aqua coloured jacket to differentiate between standard 50/125 μm (OM2) fibers (while being backward compatible). The conductor section of 50 μm is optimized for laser transmission signals, resulting in 10 Gigabit signal transmission for length:s up to 300 meters.

Product Details

  • LSHF jacket
  • TIA/EIA-568B.3 & Bellcore GR-409 compliant
  • LC/PC connectors fitted
  • 2 x 4 mm outer diameter
  • Duplex multimode 50/125µm OM3 fiber
Physical Characteristics
Inner conductor insulation material
Aramid yarn
Outer jacket material
LSHF 2.0 x 4.0 mm (Ø); coulors: Aqua
Type of cable
Fiber Optic LC/PC to LC/PC duplex
Inner conductor material
50/125 OM3 Multimode, 50 / 2.4 µm multimode glass, number of conductors: 2 (duplex)
Connection type
LC MM Duplex connector (beige housing with boot)
Cladding diameter
125 +/- 1 µm (Ø)
Standards and regulations
- RoHS2 compliant, according EU Directive 2011/65/EU
- REACH compliant, according EC 1907/2006
- Indoor use
Smoke emissions
according IEC 61034
Zero halogen compounds
according EN 50267-2-1, IEC 60754
Cabling standard
ANSI TIA-EIA 568B.3, Bellcore GR-409, OFNR-UL/CSA FT4
Mechanical characteristics
Temperature range
fixed installation: -20°C till +80°C, flexible installation: -15°C till +60°C
Bending radius
fixed installation: 10 x outer diameter, flexible installation: 20 x outer diameter
Max tension
short term: 200 N, long term: 100 N
Crush resistance
1000 (N / 100 mm)
Optical characteristics
Maximum attenuation
≤ 2.5 dB @ 860 nm, ≤ 0.8 dB @ 1300 nm
Insertion loss
≤ 0.3 dB
Return loss
≥ 35 dB
Minimum bandwidth
1500 MHz @ 850 nm, 500 MHz @ 1300 nm