Overview

19" 7 Channel Pre Amp Mixer

The Cloud MX155 is a cost-effective, rackmounting (1U) stereo audio mixer for use in all types of commercial premises. It is simple to install and operate and provides a useful range of features and configuration options.

The mixer has five primary channels, each of which has a balanced mic input and an unbalanced stereo line input: all connections are on the rear panel. There is a further stereo auxiliary line input, with both a balanced rear panel input and an unbalanced 3.5 mm TRS jack on the front panel allowing easy connection of tablets, laptops, etc. An additional, independent mic input channel is also routed to the main output; this channel features adjustable VOX detection to allow paging use, with voice-over-programme ducking. VOX threshold is adjustable via a rear panel preset control and the depth of ducking adjustable from the front panel.

The front panel provides level and HF/LF EQ controls for each of the five main channels and the mic channel; a level control for the auxiliary line input is also fitted. 15 V phantom power is available at all mic inputs, selected by internal jumpers.

The stereo output of the mixer is balanced: the front panel has an output level control and an LED bargraph meter. A rear panel switch converts the output for mono operation. Headphone monitoring of the main output is available on the front panel, with an independent headphone volume control. Installers can set the maximum level of the main output via a rear panel preset control, to prevent inadvertent overloading of power amplifiers or damage to loudspeakers. The mixer has an additional unbalanced stereo line output carrying the main mix: VOX ducking affects this output, but the level is independent of the master output level control.

To aid compliance with PA-VA regulations, the MX155 has a dedicated emergency input (balanced): when a signal is detected at this input, all other inputs are muted and the emergency input routed directly to the mixer output. An internal jumper determines whether the mic channel should remain unmuted in this situation; this allows it to be used for announcements in an emergency. In common with most other Cloud products, a Music Mute control input is fitted; short-circuiting the terminals here will also activate the emergency muting circuitry.

Product Details

  • Industrial quality stereo mixer for commercial installations
  • Five main channels, each with balanced mic input (multipin connector) and stereo unbalanced line input (RCA jack pairs) and mic/line switching
  • Rear panel per-channel gain controls
  • Front panel per-channel level and HF/LF EQ controls
  • Auxiliary line channel with balanced stereo input (rear panel multipin connector) and 3.5 mm TRS jack (front panel); front panel level control
  • Dedicated microphone channel; can be configured for automatic mic-over-programme ducking; front panel level and HF/LF EQ controls
  • 15 V phantom power available at all mic inputs (selected by internal jumpers)
  • Emergency Input (balanced) with separate level control – mutes programme for critical announcements
  • Balanced stereo output on multipin connector
  • Mono/stereo output switch
  • Master output level control and LED bargraph on front panel
  • Maximum output level can be defined to protect downstream equipment
  • Unbalanced post-mix stereo auxiliary output
  • Headphone output with separate volume control
  • Music mute control input
Mic inputs
Balanced, 40 dB gain; plug-in multipin connector
Line inputs
Unbalanced stereo, 0 dB gain, RCA jacks (phonos)
Auxiliary input
Balanced stereo, 0 dB gain; plug-in multipin connector
Emergency input
Balanced mono, 0 dB gain; plug-in multipin connector
Main output
Balanced stereo, max. output level +18 dBu
Record output
Unbalanced stereo, 0 dBu typical
Headphones
Max level 120 mW into 75 ohms @ 1% THD
Line Equalisation
LF: +/-10 dB @ 50 Hz, HF: +/-10 dB @ 10 kHz
Mic Equalisation
LF: +/-10 dB @ 100 Hz, HF: +/-10 dB @ 10 kHz
Signal-to-noise ratio
>77 dB (line inputs)
Crosstalk
>65 dB (line inputs)
THD
< 0.1% (output < +18 dBu)
Frequency response
20 Hz to 20 kHz, +/-3 dB
Channel balance
< 3 dB
Power input
115 VAC or 230 VAC; 50/60 Hz
Power consumption
20 W max.
Dimensions (W x H x D)
483 (19") x 44.5 (1U) x 162.5 mm
Weight
2.3 kg