Overview

4x 120 W 100V Power Amplifier

The Cloud VA4120 is a cost-effective audio power amplifier for use in all types of commercial premises. It has been designed to be as simple to install and operate as possible.

The VA4120 has four channels with 120 W output power each. The amplifier can drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V loudspeaker distribution systems.

The amplifiers incorporates a limiter in each channel to protect the output stage and connected loudspeakers: this reduces excessive signal levels to ensure that clipping does not occur. Further protection circuitry disconnects the output if the maximum permitted internal temperature is exceeded, or if DC is detected at the output terminals.

All connections and controls are on the rear panel. Each channel has a preset level control and a switchable high-pass filter to mitigate the effect of transformer saturation at low frequencies when driving 25/70/100 V systems.

The front panel has a set of LEDs for each channel, confirming signal presence, excessive level and amplifier protection activity. Both models are forced-air cooled by fans mounted on the rear panel.

Product Details

  • Industrial quality four-channel power amplifiers
  • Power output: 120 W/channel
  • Outputs suitable for either low-impedance (min. 4 ohm) or 25/70/100 V-line systems
  • Balanced inputs with per-channel gain preset controls
  • Per-channel 65 Hz high-pass filter, for use with 25/70/100 V-line systems
  • Per-channel limiter – prevents clipping
  • Over-temperature and output DC protection
  • Forced-air cooling
Input Frequency Response
20 Hz to 20 kHz, +/-1 dB
Input impedance
47 kohms
Input Headroom
16 dB
Noise
< -85 dB (22 kHz bandwidth)
Output Power
4 x 120 watts
Output Inpedance
4 ohms, 5.2 ohms (25 V), 41 ohms (70 V), 83 ohms (100 V)
Output Frequency response
20 Hz to 20 kHz, +/-1 dB
THD + N
< 0.05% @ 1 kHz
Protection
Fixed level signal limiter: DC, over-current and over-temperature protection
Power input
115 VAC or 230 VAC, ±10%; 45 – 65 Hz
Normal operating temperature
0 °C to 35 °C
Cooling
Forced air cooling: 1 x 80 mm dia. fan, Airflow direction: front-to-back
Power Consumption
24.5 W (Idle), 418 W (1/8th Power), 562 W (1/3rd Power)
Heat Loss
99 KJ/hr (93.9 BTU/hr) (Idle), 1,288 KJ/hr (1,221 BTU/hr) (1/8th Power), 1,591 KJ/hr (1,508 BTU/hr) (1/3rd Power)
Dimensions (W x H x D)
482.6 (19") x 88 mm (2U) x 408 mm
Weight
18.2 kg