The PSQ108 is an intelligent power sequencer with 8 x IEC C13 outputs which can be remotely switched using AUDAC Touch™ via TCP/IP or RS-232 connection. It also features front controls for manual control. Several PSQ108 devices can be daisy chained together so that only one IP address is needed for controlling all units. The sequential power on/off function reduces the inrush current of the connected devices when power is turned on and by using the configurable delay times, the order in which the devices turn on can be set. Other features include short circuit and overcurrent protection by means of a 16A circuit breaker, a voltage and current display and a front USB charging port (max 1000mA).

Elevate your rack organization with this sleek and functional face plate designed specifically for the CAYMON ISx20 series rack shelves. Crafted with precision and attention to detail, this quarter rack space face plate seamlessly integrates with your existing 19 ISx20 series standard shelf, providing a professional and polished appearance. Whether you're a professional AV installer or a home audio enthusiast, the CAYMON face plate enhances the aesthetics of your rack while maintaining a streamlined and organized environment.

Elevate your audio and video equipment setup with these purpose-built support brackets, designed not only for aesthetics but also for enhanced rigidity and weight support up to 20kg. Crafted with precision, this pair of rear support brackets seamlessly integrates with the ISx20 series rack shelves, providing a secure foundation for your valuable gear. The robust design adds an extra layer of stability, significantly increasing the weight-bearing capacity of your 19” standard shelf. Installation is a breeze, thanks to the user-friendly design and compatibility with the ISx20 series. *Not suited for IS120S with 180mm depth.

Optional back supports for the RDx20 series rack drawers for increased load capacity (only 2U and 3U).

Elevate your rack organization with this sleek and functional face plate designed specifically for the CAYMON ISx20 series rack shelves. Crafted with precision and attention to detail, this half rack space face plate seamlessly integrates with your existing 19 ISx20 series standard shelf, providing a professional and polished appearance. Whether you're a professional AV installer or a home audio enthusiast, the CAYMON face plate enhances the aesthetics of your rack while maintaining a streamlined and organized environment.

The IS series offers three models catering to 1 unit, 2 units, and 3 units rack mounting, providing you with a solution tailored to your specific requirements. Crafted from cold rolled steel with a robust plate thickness of 1.5 mm, these shelves are designed to meet the demands of modern rack assembly environments. One of the standout features of the IS Series is its modular and flexible fixation system, allowing easy assembly for devices without standard 19” mounting ears. The enhanced usability extends beyond the conventional, with an increased width and a notable usable depth of 300 mm, providing you with more space to accommodate your equipment. In the 1 unit version a shorter version with a usable depth of 180 mm is also available. Ventilation is a key consideration, and the IS Series addresses this with an improved cutout pattern for enhanced airflow, keeping your devices cool and functioning optimally. The shelves come with an optional half-width and quarter-width face plates, offering a customizable solution to suit your rack configuration needs. For added load capacity and stability, the IS Series offers an optional back support feature. This ensures that your equipment stays securely in place, even in demanding environments. In the realm of cable management, the integrated cable lacing cutouts streamline the process, helping you maintain a clean and organized setup. The shelves are coated with a black (RAL9004) powder finish, boasting a fine structured finish that not only adds an aesthetic touch but also significantly improves scratch resistance.

The IS series offers three models catering to 1 unit, 2 units, and 3 units rack mounting, providing you with a solution tailored to your specific requirements. Crafted from cold rolled steel with a robust plate thickness of 1.5 mm, these shelves are designed to meet the demands of modern rack assembly environments. One of the standout features of the IS Series is its modular and flexible fixation system, allowing easy assembly for devices without standard 19” mounting ears. The enhanced usability extends beyond the conventional, with an increased width and a notable usable depth of 300 mm, providing you with more space to accommodate your equipment. In the 1 unit version a shorter version with a usable depth of 180 mm is also available. Ventilation is a key consideration, and the IS Series addresses this with an improved cutout pattern for enhanced airflow, keeping your devices cool and functioning optimally. The shelves come with an optional half-width and quarter-width face plates, offering a customizable solution to suit your rack configuration needs. For added load capacity and stability, the IS Series offers an optional back support feature. This ensures that your equipment stays securely in place, even in demanding environments. In the realm of cable management, the integrated cable lacing cutouts streamline the process, helping you maintain a clean and organized setup. The shelves are coated with a black (RAL9004) powder finish, boasting a fine structured finish that not only adds an aesthetic touch but also significantly improves scratch resistance.

The IS series offers three models catering to 1 unit, 2 units, and 3 units rack mounting, providing you with a solution tailored to your specific requirements. Crafted from cold rolled steel with a robust plate thickness of 1.5 mm, these shelves are designed to meet the demands of modern rack assembly environments. One of the standout features of the IS Series is its modular and flexible fixation system, allowing easy assembly for devices without standard 19” mounting ears. The enhanced usability extends beyond the conventional, with an increased width and a notable usable depth of 300 mm, providing you with more space to accommodate your equipment. In the 1 unit version a shorter version with a usable depth of 180 mm is also available. Ventilation is a key consideration, and the IS Series addresses this with an improved cutout pattern for enhanced airflow, keeping your devices cool and functioning optimally. The shelves come with an optional half-width and quarter-width face plates, offering a customizable solution to suit your rack configuration needs. For added load capacity and stability, the IS Series offers an optional back support feature. This ensures that your equipment stays securely in place, even in demanding environments. In the realm of cable management, the integrated cable lacing cutouts streamline the process, helping you maintain a clean and organized setup. The shelves are coated with a black (RAL9004) powder finish, boasting a fine structured finish that not only adds an aesthetic touch but also significantly improves scratch resistance.

The IS series offers three models catering to 1 unit, 2 units, and 3 units rack mounting, providing you with a solution tailored to your specific requirements. Crafted from cold rolled steel with a robust plate thickness of 1.5 mm, these shelves are designed to meet the demands of modern rack assembly environments. One of the standout features of the IS Series is its modular and flexible fixation system, allowing easy assembly for devices without standard 19” mounting ears. The enhanced usability extends beyond the conventional, with an increased width and a notable usable depth of 300 mm, providing you with more space to accommodate your equipment. In the 1 unit version a shorter version with a usable depth of 180 mm is also available. Ventilation is a key consideration, and the IS Series addresses this with an improved cutout pattern for enhanced airflow, keeping your devices cool and functioning optimally. The shelves come with an optional half-width and quarter-width face plates, offering a customizable solution to suit your rack configuration needs. For added load capacity and stability, the IS Series offers an optional back support feature. This ensures that your equipment stays securely in place, even in demanding environments. In the realm of cable management, the integrated cable lacing cutouts streamline the process, helping you maintain a clean and organized setup. The shelves are coated with a black (RAL9004) powder finish, boasting a fine structured finish that not only adds an aesthetic touch but also significantly improves scratch resistance.

The RDx20x series of 19” rack drawers comes available in 1U, 2U and 3U unit heights with and without lock. The chassis is constructed of 1,5 mm thick cold rolled steel, while the tray is finished in 1,2 mm thick cold rolled steel. They feature full extension 3 section drawer rails, pushout holes on the back of the tray for cable insertion, a rubber anti slip liner, a full-width handle and optional back supports (RD2S) for increased load capacity (only 2U and 3U).

The CASY203 aluminum module features four holes to fit a D-size connector. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis. The choice of aluminum for these blind plates has a couple of advantages compared to their steel counterparts. Aluminum is much lighter than steel and therefore only adds a little extra weight to a CASY configuration. These blind plates are ideal for quickly modifying and adding custom cut-out holes due to their softer material.

The CASY105A aluminum module features two holes to fit a D-size connector. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis. The choice of aluminum for these blind plates has a couple of advantages compared to their steel counterparts. Aluminum is much lighter than steel and therefore only adds a little extra weight to a CASY configuration. These blind plates are ideal for quickly modifying and adding custom cut-out holes due to their softer material.

The CASY103A aluminum module features one hole to fit a D-size connector. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis. The choice of aluminum for these blind plates has a couple of advantages compared to their steel counterparts. Aluminum is much lighter than steel and therefore only adds a little extra weight to a CASY configuration. These blind plates are ideal for quickly modifying and adding custom cut-out holes due to their softer material.

The CASY304 module features a 60mm hole with the same mounting pattern as standard wall boxes. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis.

The CASY153 is fitted with an HDMI 2.0 pigtail gender. It supports 4K resolution at 60 Hz with a bandwidth up to 18 Gigabits per second. This flexible structure for system integration & connectivity can easily be implemented in a wide variety of CASY chassis.

The CP45PG is a 45 x 45 mm connection module with German Schuko socket (CEE 7/3) in the colour black. The 45 x 45 mm size is compatible with CAYMON CASY303 and standard 45 x 45 mm mounting frames and cover plates. The electrical connection is made via screw terminals on the back of the module.

The CP45PUSB is a 45 x 45 mm charger module with one USB type A and type C output socket available in black color & 2 versions. This module is compatible with CAYMON CASY303 and standard 45 x 45 mm mounting frames and cover plates.

The CP45PUSB65 is a 45 x 45 mm 65 W PD charger module with one USB type A and type C output socket available in black color & 2 versions. This module is compatible with CAYMON CASY303 and standard 45 x 45 mm mounting frames and cover plates.

The WPR612R is a professional 19” wall mount metal rack compliant to ANSI/EIA RS-310D, DIN41491, IEC 60297 standards. It is a solid construction with a cold rolled steel 1,5 mm thick frame and 1,2 mm thick plates. The WPR612R comes fully assembled and can easily be mounted on the wall. The 19” mounting profile with punched square holes for use with snap- in cage nuts in combination with the printed unit measurement indicators ensure easy fitting of the equipment. The tempered smokey grey glass door is fitted with a keylock to keep the equipment only accessible for authorized persons. The removable sides and back panel allow easy installing and cabling of the equipment while the in depth adjustable 19” profiles provide great flexibility for installing equipment depending on its depth.

The CASY044S is a modular stage box which can be fitted with 4 modules from the CASY range. The flexible and modular structure ensures a maximum versatility, allowing to adapt the system to each project's specific requirements. Possibilities are ranging from audio, video and data interconnection to power distribution, control panels, power supplies and many more. The aluminum construction features pre-threaded hole inserts allowing module installation with a maximum of 4 units with a built-in depth up to 60 mm. It is fitted with a cable gland with strain relief accepting diameters in a range of 9 to 16 mm, which can be removed for assembly of a D-sized connector type (e.g. PowerCON). The sides are constructed out of cold-rolled steel protected with rubber shock bumpers perfect for all use and abuse. Modules can be fixed inside the unit using the included M3 screws. The overall construction is finished in a black (RAL9004) structured and scratch-resistant powder coating.

The CASY048S is a modular stage box which can be fitted with 8 modules from the CASY range. The flexible and modular structure ensures a maximum versatility, allowing to adapt the system to each project's specific requirements. Possibilities are ranging from audio, video and data interconnection to power distribution, control panels, power supplies and many more. The aluminum construction features pre-threaded hole inserts allowing module installation with a maximum of 8 units with a built-in depth up to 60 mm. It is fitted with a cable gland with strain relief accepting diameters in a range of 9 to 16 mm, which can be removed for assembly of a D-sized connector type (e.g. PowerCON). The sides are constructed out of cold-rolled steel protected with rubber shock bumpers perfect for all use and abuse. Modules can be fixed inside the unit using the included M3 screws. The overall construction is finished in a black (RAL9004) structured and scratch-resistant powder coating.

EK100 is a universal, easy to use earthing kit for 19” rack cabinets. The kit includes 4 cables with 2 M6 cable lugs for connecting the main chassis to the doors and removable side panels and 1 cable with M6 and M3 cable lug for connecting the main chassis to the grounding point on a PSR power distribution unit. The cables for the removable panels have quick disconnect connectors in the middle for easy disconnection. The cross section of the cables is 6mm and all mounting hardware is included.

The WPR10RF is a 120 mm sleeve bearing axial ventilation fan for installation in the top compartment of the WPR racks to improve the air circulation through the cabinet. The heated air caused by the dissipation of the devices installed in the cabinet will rise and will be rapidly drained due to the under pressure caused by the fan. The constant air flow will improve a positive influence to the performance and lifetime of the equipment installed inside the cabinet. It is constructed out of a die-cast aluminum housing with a PBT thermoplastic blade and rotates with a speed of 2600 RPM providing a constant airflow of 127 Cbm / hour (75 Cfm). It produces a constant noise of 45 dB and the nominal life term is about 30.000 hours. The power consumption is 30 Watt and operates on a mains voltage of 220~240V AC / 50~60 Hz.

The WPR606R/B is a professional 19” wall mount metal rack compliant to ANSI/EIA RS-310D, DIN41491, IEC 60297 standards. It is a solid construction with a cold rolled steel 1,5 mm thick frame and 1,2 mm thick plates. The WPR606R/B comes fully assembled and can easily be mounted on the wall. The 19” mounting profile with punched square holes for use with snap-in cage nuts in combination with the printed unit measurement indicators ensure easy fitting of the equipment. The tempered smokey grey glass door is fitted with a keylock to keep the equipment only accessible for authorized persons. The removable sides allow easy installing and cabling of the equipment while the in depth adjustable 19” profiles provide great flexibility for installing equipment depending on its depth.