The Cloud VMA120 is a cost-effective mixer-amplifier for use in all types of commercial premises. IT has been designed to be as simple to install and operate as possible, but offer a useful range of features and configuration options. The units is a 120 W mono power amplifiers combined with a simple mixer stage. It may be used to drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V loudspeaker distribution systems. The two different types of speaker system cannot be driven simultaneously. A high-pass filter, selectable by internal jumper, minimises the effect of transformer saturation at low frequencies when driving 25/70/100 V-line systems. VMA120 has four stereo line inputs (typically for connection of music sources), including an AUX input in the form of a 3.5 mm jack socket on the front panel to permit the easy connection of laptops, tablets and similar devices. Two balanced microphone inputs are also provided: phantom power is available at each, selectable by internal jumper. A high-pass filter for each mic input may also be selected by internal jumper: this reduces the effects of handling and breath noise. All mic and line inputs (except the AUX input) have a preset-type gain control adjacent to the input connectors on the rear panel. The front panel has rotary controls for line input selection, music level, the level of each mic input, and LF/HF EQ adjustment for the summed mic inputs. Two switches enable priority options: one allows the mic inputs to have priority over music sources to permit announcements, the other gives one line input priority over all others: this is useful for connecting a jukebox or message store, for example. Two further switches enable/disable each mic input. The front panel controls also include a master level control and HF/LF EQ adjustment for the main output. The rear panel has a music mute control input which can be used to mute all music sources in an emergency: an internal jumper allows this to also mute the mic inputs if wished. There is also a balanced auxiliary output to allow additional power amplifiers to be slaved.

The Cloud VMA240 is a cost-effective mixer-amplifier for use in all types of commercial premises. IT has been designed to be as simple to install and operate as possible, but offer a useful range of features and configuration options. The units is a 240 W mono power amplifiers combined with a simple mixer stage. It may be used to drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V loudspeaker distribution systems. The two different types of speaker system cannot be driven simultaneously. A high-pass filter, selectable by internal jumper, minimises the effect of transformer saturation at low frequencies when driving 25/70/100 V-line systems. VMA240 has four stereo line inputs (typically for connection of music sources), including an AUX input in the form of a 3.5 mm jack socket on the front panel to permit the easy connection of laptops, tablets and similar devices. Two balanced microphone inputs are also provided: phantom power is available at each, selectable by internal jumper. A high-pass filter for each mic input may also be selected by internal jumper: this reduces the effects of handling and breath noise. All mic and line inputs (except the AUX input) have a preset-type gain control adjacent to the input connectors on the rear panel. The front panel has rotary controls for line input selection, music level, the level of each mic input, and LF/HF EQ adjustment for the summed mic inputs. Two switches enable priority options: one allows the mic inputs to have priority over music sources to permit announcements, the other gives one line input priority over all others: this is useful for connecting a jukebox or message store, for example. Two further switches enable/disable each mic input. The front panel controls also include a master level control and HF/LF EQ adjustment for the main output. The rear panel has a music mute control input which can be used to mute all music sources in an emergency: an internal jumper allows this to also mute the mic inputs if wished. There is also a balanced auxiliary output to allow additional power amplifiers to be slaved.

The Cloud VA4120 is a cost-effective audio power amplifier for use in all types of commercial premises. It has been designed to be as simple to install and operate as possible. The VA4120 has four channels with 120 W output power each. The amplifier can drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V loudspeaker distribution systems. The amplifiers incorporates a limiter in each channel to protect the output stage and connected loudspeakers: this reduces excessive signal levels to ensure that clipping does not occur. Further protection circuitry disconnects the output if the maximum permitted internal temperature is exceeded, or if DC is detected at the output terminals. All connections and controls are on the rear panel. Each channel has a preset level control and a switchable high-pass filter to mitigate the effect of transformer saturation at low frequencies when driving 25/70/100 V systems. The front panel has a set of LEDs for each channel, confirming signal presence, excessive level and amplifier protection activity. Both models are forced-air cooled by fans mounted on the rear panel.

The Cloud VA2120 is a cost-effective audio power amplifier for use in all types of commercial premises. It has been designed to be as simple to install and operate as possible. The VA2120 has two channels with 120 W output power each. The amplifier can drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V loudspeaker distribution systems. The amplifiers incorporates a limiter in each channel to protect the output stage and connected loudspeakers: this reduces excessive signal levels to ensure that clipping does not occur. Further protection circuitry disconnects the output if the maximum permitted internal temperature is exceeded, or if DC is detected at the output terminals. All connections and controls are on the rear panel. Each channel has a preset level control and a switchable high-pass filter to mitigate the effect of transformer saturation at low frequencies when driving 25/70/100 V systems. The front panel has a set of LEDs for each channel, confirming signal presence, excessive level and amplifier protection activity. Both models are forced-air cooled by fans mounted on the rear panel.

The Cloud MPA120MK2 is intended to provide a complete audio solution for Houses of Worship, retail outlets, hotels, licensed premises and other spaces where music, announcements and/or flexible paging are required. It combines the functions of a two-channel microphone mixer with full paging facilities, a six-input music source selector and a mono power amplifier in a single 1U unit. The MPA120MK2 has six unbalanced stereo line inputs for music sources, and two balanced microphone inputs. Each microphone input has its own rear panel sensitivity control and front panel gain control, allowing multiple mics to be mixed together. The selected music source is mixed with the summed mic signals before being fed to the power amplifier stage. The MPA120MK2 is compatible with the Cloud PM1 single-zone paging microphone, and may also be used for one of the zones supported by the Cloud PM4/8/12/16/4-SA/8-SA multizone paging microphones. The power output stage is transformerless, and is capable of driving 70/100 V loudspeaker distribution systems directly. Rear panel DIP switches allow the output voltage and impedance to be selected, permitting the amplifier to be used to either drive low-impedance (4 or 8 ohm) loudspeakers or 70/100 V systems. A particularly useful feature of the MPA120MK2 is the Facility Port; this allows a remote input module from the Cloud LM-2 Series (for wired sources) or BT-1 Series (for Bluetooth wireless sources) to be connected via easy-to-install screened Cat 5 cable. Microphones, and/or line sources such as radio mics, DJ mixers, MP3 players, laptops or other audio sources – including Bluetooth-equipped laptops, tablets and smartphones – can then be connected locally, simplifying the use of the area for presentations where portable audio sources are in use.

The Cloud MPA240MK2 is intended to provide a complete audio solution for Houses of Worship, retail outlets, hotels, licensed premises and other spaces where music, announcements and/or flexible paging are required. It combines the functions of a two-channel microphone mixer with full paging facilities, a six-input music source selector and a mono power amplifier in a single 1U unit. The MPA240MK2 has six unbalanced stereo line inputs for music sources, and two balanced microphone inputs. Each microphone input has its own rear panel sensitivity control and front panel gain control, allowing multiple mics to be mixed together. The selected music source is mixed with the summed mic signals before being fed to the power amplifier stage. The MPA240MK2 is compatible with the Cloud PM1 single-zone paging microphone, and may also be used for one of the zones supported by the Cloud PM4/8/12/16/4-SA/8-SA multizone paging microphones. The power output stage is transformerless, and is capable of driving 70/100 V loudspeaker distribution systems directly. Rear panel DIP switches allow the output voltage and impedance to be selected, permitting the amplifier to be used to either drive low-impedance (4 or 8 ohm) loudspeakers or 70/100 V systems. A particularly useful feature of the MPA240MK2 is the Facility Port; this allows a remote input module from the Cloud LM-2 Series (for wired sources) or BT-1 Series (for Bluetooth wireless sources) to be connected via easy-to-install screened Cat 5 cable. Microphones, and/or line sources such as radio mics, DJ mixers, MP3 players, laptops or other audio sources – including Bluetooth-equipped laptops, tablets and smartphones – can then be connected locally, simplifying the use of the area for presentations where portable audio sources are in use.

The MA60 is an exciting new development from Cloud Electronics, combining for the first time the proven versatility of Cloud mixer-amplifiers in a single compact (2U, half-rack width) unit, and at a very competitive price point. The MA60 will find many applications in the Retail, Hospitality, Licensed Premises and other entertainment markets and is the most feature rich of the Utility Mixer/Amps on the market which also offers the best sound quality and the traditional Cloud reliable. Single Zone, 60w, 4Ohm Output as Standard with Optional 70/100v Internal Transformer (CXL-60T)

The MA80E is a very compact mono amplifier designed for integration into installed audio and AV systems where de-centralisation of system components is advantageous. It is intended as an “installand-forget” component, and is small enough to be fitted into a wall or ceiling void, or in any convenient location adjacent to a projector, flat screen display or loudspeakers, for example. A simple set of controls and configuration options makes it easy to integrate into any audio system. It is highly suitable for use with in-store digital signage, gallery and museum exhibits and fixed or mobile tour guide systems. The MA80E provides 80W Mono Output at 4Ω (low impedance) and features an Ethernet Web Browser and RS232 control interface. It is fitted with a Microphone input with EQ and input gain adjustment, two line inputs and Facility Port input allowing connection of the LM-2 Input Module Wall Plates and the BT-1F Bluetooth Audio Wireless Input Module. ENERGY STAR ® Tested & Certified providing extensive power saving and energy consumption saving features such as Auto Power Down (APD) and rapid waking. The MA80E is powered internally via 100-240V SMPS. There is an optional 20mm Flexible Conduit Kit available (CA947034) for fire protection.

The MA80FT is a very compact mono amplifier designed for integration into installed audio and AV systems where de-centralisation of system components is advantageous. It is intended as an “installand-forget” component, and is small enough to be fitted into a wall or ceiling void, or in any convenient location adjacent to a projector, flat screen display or loudspeakers, for example. A simple set of controls and configuration options makes it easy to integrate into any audio system. It is highly suitable for use with in-store digital signage, gallery and museum exhibits and fixed or mobile tour guide systems. The MA80FT provides 80W Mono Output at either 4Ω (low impedance) or 70/100v line which is switchable via rear Dip switches. It is fitted with a paging Microphone input with access contacts, a useful 70/100v line input a futher two line inputs and Facility Port input allowing connection of the LM-2 Input Module Wall Plates and the BT-1F Bluetooth Audio Wireless Input Module. ENERGY STAR ® Tested & Certified providing extensive power saving and energy consumption saving features such as Auto Power Down (APD) and rapid waking. The MA80 is powered internally via 100-240V SMPS. There is an optional 20mm Flexible Conduit Kit available (CA947034) for fire protection.

The MA80 is a very compact mono amplifier designed for integration into installed audio and AV systems where de-centralisation of system components is advantageous. It is intended as an “installand-forget” component, and is small enough to be fitted into a wall or ceiling void, or in any convenient location adjacent to a projector, flat screen display or loudspeakers, for example. A simple set of controls and configuration options makes it easy to integrate into any audio system. It is highly suitable for use with in-store digital signage, gallery and museum exhibits and fixed or mobile tour guide systems. The MA80 provides 80W Mono Output at 4Ω (low impedance). Fitted with a Microphone Input with EQ and input gain adjustment, a further two line inputs, an RL-1 remote wall plate connection, music mute connection and dip switch settings providing Line 1 priority and mic priority switching in addition to switching on/off of the RL-1 functionality. ENERGY STAR ® Tested & Certified providing extensive power saving and energy consumption saving features such as Auto Power Down (APD) and rapid waking. The MA80 is powered internally via 100-240V SMPS. There is an optional 20mm Flexible Conduit Kit available (CA947034) for fire protection.

The MA40T is a very compact mono amplifiers designed for integration into audio and AV systems where de-centralised installation is advantageous. It is intended as “install-and-forget” components, and is small enough to be fitted into wall or ceiling voids or in any convenient location adjacent to projectors, flat screen displays or loudspeakers. A simple set of controls and configuration options makes it easy to integrate it into any audio system. IT is highly suitable for use with in-store digital signage, gallery and museum exhibits and fixed or mobile tour guide systems. The MA40T is a mini amplifier providing 40W Output at 25V / 70V 100V. It is fitted with a paging microphone input with access contacts, a useful 70/100V line input option, a further two line inputs and a facility port input option allowing connection of the LM-2 wall input module and the new Cloud BT-1F Bluetooth Audio Wireless input module. The MA40T is powered via a 12-24V power supply and offers music mute functionality to allow simple connection to fire alarm and other interfaces. It is highly flexible and suitable for use where the simple addition of another zone to an existing installation may be required.

The MA60T is the 70v/100v version of the long established MA60 Single Zone Compact Mixer Amplifier (2U, half-rack width) unit, and at a very competitive price point. The MA60 will find many applications in the Retail, Hospitality, Licensed Premises and other entertainment markets and is the most feature rich of the Utility Mixer/Amps on the market which also offers the best sound quality and the traditional Cloud reliable. Single Zone, 50w with 70/100v internal Transformer.

The MA40 is a very compact mono amplifiers designed for integration into audio and AV systems where de-centralised installation is advantageous. It is intended as “install-and-forget” components, and is small enough to be fitted into wall or ceiling voids or in any convenient location adjacent to projectors, flat screen displays or loudspeakers. A simple set of controls and configuration options makes it easy to integrate it into any audio system. IT is highly suitable for use with in-store digital signage, gallery and museum exhibits and fixed or mobile tour guide systems. The MA40 is a mini amplifier providing 40W output at 4Ω (low impedance). It is fitted with a microphone input with EQ and input gain adjustment, a further two line inputs, an RL-1 remote wall plate connection, music mute connection and dip switch settings providing Line 1 priority and mic priority switching in addition to switching on/off of the RL-1 functionality. The MA40 is powered via 12-24V external power supply, making it extremely suitable for transport applications, digital signage applications and de-centralised solutions.

The MA40F is a very compact mono amplifiers designed for integration into audio and AV systems where de-centralised installation is advantageous. It is intended as “install-and-forget” components, and is small enough to be fitted into wall or ceiling voids or in any convenient location adjacent to projectors, flat screen displays or loudspeakers. A simple set of controls and configuration options makes it easy to integrate it into any audio system. IT is highly suitable for use with in-store digital signage, gallery and museum exhibits and fixed or mobile tour guide systems. The MA40F is a mini amplifier providing 40 W Output at 4 ohms (low impedance). It is fitted with a paging microphone input with access contacts, a useful 70 / 100 V line input option, a further two line inputs and a facility port input option allowing connection of the LM-2 wall input module and the Cloud BT-1F Bluetooth Audio Wireless input module. The MA40F is powered via a 12 - 24 V power supply and offers music mute functionality to allow simple connection to fire alarm and other interfaces which makes it highly flexible and suitable for use in themed/visitor attractions including use in bus / tram / river tour guide systems.

The MA40E is a very compact stereo amplifier of advanced design, intended for integration into audio and AV systems where de-centralised installation is advantageous. It may be considered an “install-and-forget” component, and is small enough to be fitted into a wall or ceiling void, or in any convenient location adjacent to projectors, flat screen displays or loudspeakers, for example. It is highly suitable for use with in-store digital signage, gallery and museum exhibits and in fixed or mobile tour guide systems. The MA40E is a mini amplifier providing 2 x 20W Output at 4Ω (low impedance). It is fitted with an ethernet and RS232 interface, two line inputs and a facility port input option allowing connection of the LM-2 wall input module and the new Cloud BT-1F Bluetooth Audio Wireless input module. A greatly enhanced set of device features is available once the password-protected web pages are accessed through the Ethernet port. The web pages allow general device configuration and advanced control over signal routing, levels and an extended EQ sections, with a 7-Band room EQ, a 5-Band Speaker EQ and a variable high-pass filter for 70/100 V line systems. A multi-user system of passwords is catered for: each user can be given specific access privileges at installation to prevent unauthorised system adjustment. The MA40E is powered via a 12-24V power supply and offers music mute functionality to allow simple connection to fire alarm and other interfaces and provides a great bridge between centralised and de-centralised solutions.

Cloud CV8125 digital amplifier is a versatile 8-channel power amplifier of advanced design, able to drive 100 V/70 V loudspeaker systems directly. It is ideal for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Large installations using multiple amplifiers will benefit from the amplifiers’ network connectivity: each amplifier may be configured individually, controlled and monitored remotely over a standard Ethernet network. The CV8125 includes an on-board, user-configurable DSP permitting great flexibility of internal architecture, and a wide variety of remote control options including Ethernet, RS-232 and DC: the latter providing compatibility with standard Cloud remote control plates. It is not necessary to either connect a computer nor remove the lid to access internal jumpers to set primary configuration parameters such as input routing, which may be done using rear panel DIP switches. Where more advanced configuration options are needed, they can be easily accessed through the internal web server and an Ethernet connection to an external device. Flexible Output The CV8125 offers a total power output capability of 1kW, shared across the amplifier channels. This flexible approach allows a single, multi-channel amplifier, to drive loudspeaker systems differing in load size, in different areas of a building or venue, whilst optimising overall power output capability. Energy Star The CV8125 digital amplifier is designed to be Energy Star compliant. Automatic Power Down, triggered if an input signal is not detected for thirty minutes, reduces power consumption to just 2.5 watts. Remote control of the power down state is available via an external contact closure. Ethernet / DSP A full suite of user configurable DSP functionality is on-board and includes input routing, multi-band parametric room and speaker optimisation EQ, output level control and limiting, and 1.5s of assignable delay. The amplifier can be easily set up for multi-channel or parallel channel operation and bi-amping, with full control of crossover parameters. Auxiliary Outputs Providing the same DSP power as the normal amplifier channels, the auxiliary outputs can be configured as traditional slave outputs, or used as independent signal processing and routing channels. Analogue and Digital Control The CV8125 digital amplifier is compatible with the standard Cloud RL series remote level control plates. DSP parameters are accessible via RS-232 and Ethernet, for interfacing to third-party control systems including Crestron, AMX, Control4 etc. A 3-way GPIO port can be configured for external master mute and fault condition signalisation.

Cloud CV4250 digital amplifier is a versatile 4-channel power amplifier of advanced design, able to drive 100 V/70 V loudspeaker systems directly. It is ideal for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Large installations using multiple amplifiers will benefit from the amplifiers’ network connectivity: each amplifier may be configured individually, controlled and monitored remotely over a standard Ethernet network. The CV4250 includes an on-board, user-configurable DSP permitting great flexibility of internal architecture, and a wide variety of remote control options including Ethernet, RS-232 and DC: the latter providing compatibility with standard Cloud remote control plates. It is not necessary to either connect a computer nor remove the lid to access internal jumpers to set primary configuration parameters such as input routing, which may be done using rear panel DIP switches. Where more advanced configuration options are needed, they can be easily accessed through the internal web server and an Ethernet connection to an external device. Flexible Output The CV4250 offers a total power output capability of 1kW, shared across the amplifier channels. This flexible approach allows a single, multi-channel amplifier, to drive loudspeaker systems differing in load size, in different areas of a building or venue, whilst optimising overall power output capability. Energy Star The CV4250 digital amplifier is designed to be Energy Star compliant. Automatic Power Down, triggered if an input signal is not detected for thirty minutes, reduces power consumption to just 2.5 watts. Remote control of the power down state is available via an external contact closure. Ethernet / DSP A full suite of user configurable DSP functionality is on-board and includes input routing, multi-band parametric room and speaker optimisation EQ, output level control and limiting, and 1.5s of assignable delay. The amplifier can be easily set up for multi-channel or parallel channel operation and bi-amping, with full control of crossover parameters. Auxiliary Outputs Providing the same DSP power as the normal amplifier channels, the auxiliary outputs can be configured as traditional slave outputs, or used as independent signal processing and routing channels. Analogue and Digital Control The CV4250 digital amplifier is compatible with the standard Cloud RL series remote level control plates. DSP parameters are accessible via RS-232 and Ethernet, for interfacing to third-party control systems including Crestron, AMX, Control4 etc. A 3-way GPIO port can be configured for external master mute and fault condition signalisation.

Cloud CV2500 digital amplifier is a versatile two-channel power amplifier of advanced design, able to drive 100 V/70 V loudspeaker systems directly. It is ideal for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Large installations using multiple amplifiers will benefit from the amplifiers’ network connectivity: each amplifier may be configured individually, controlled and monitored remotely over a standard Ethernet network. The CV2500 includes an on-board, user-configurable DSP permitting great flexibility of internal architecture, and a wide variety of remote control options including Ethernet, RS-232 and DC: the latter providing compatibility with standard Cloud remote control plates. It is not necessary to either connect a computer nor remove the lid to access internal jumpers to set primary configuration parameters such as input routing, which may be done using rear panel DIP switches. Where more advanced configuration options are needed, they can be easily accessed through the internal web server and an Ethernet connection to an external device. Flexible Output The CV2500 offers a total power output capability of 1kW, shared across the amplifier channels. This flexible approach allows a single, multi-channel amplifier, to drive loudspeaker systems differing in load size, in different areas of a building or venue, whilst optimising overall power output capability. Energy Star The CV2500 digital amplifier is designed to be Energy Star compliant. Automatic Power Down, triggered if an input signal is not detected for thirty minutes, reduces power consumption to just 2.5 watts. Remote control of the power down state is available via an external contact closure. Ethernet / DSP A full suite of user configurable DSP functionality is on-board and includes input routing, multi-band parametric room and speaker optimisation EQ, output level control and limiting, and 1.5s of assignable delay. The amplifier can be easily set up for multi-channel or parallel channel operation and bi-amping, with full control of crossover parameters. Auxiliary Outputs Providing the same DSP power as the normal amplifier channels, the auxiliary outputs can be configured as traditional slave outputs, or used as independent signal processing and routing channels. Analogue and Digital Control The CV2500 digital amplifier is compatible with the standard Cloud RL series remote level control plates. DSP parameters are accessible via RS-232 and Ethernet, for interfacing to third-party control systems including Crestron, AMX, Control4 etc. A 3-way GPIO port can be configured for external master mute and fault condition signalisation.

The Cloud CA Series is a range of versatile multi-channel audio power amplifiers of advanced design, able to drive low impedance loudspeakers, or high impedance (100 V or 70 V) loudspeaker distribution systems directly. They are ideal for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Particular design attention has been paid to the amplifiers’ energy efficiency. The Class D output stages dispense with line output transformers, and consequently offer great savings in weight and size over earlier designs. An automatic, two-stage power-down feature (APD) resulting in power consumption of less than 2.5 W. The amplifiers also include a remote standby/wake up function, enabling them to be placed into standby mode - and subsequently powered up again - by a simple external contact closure. The APD feature can be disabled by a rear panel DIP switch. Safety features of the design include output DC detection, overcurrent protection, and thermal monitoring. A switch on delay provides loudspeaker protection at power-up. All models use variable–speed forced-air cooling. The 2 channel CA2250 can deliver a maximum of 500 W of audio power, which may be similarly shared between ist two channels.

The Cloud CA Series is a range of versatile multi-channel audio power amplifiers of advanced design, able to drive low impedance loudspeakers, or high impedance (100 V or 70 V) loudspeaker distribution systems directly. They are ideal for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Particular design attention has been paid to the amplifiers’ energy efficiency. The Class D output stages dispense with line output transformers, and consequently offer great savings in weight and size over earlier designs. An automatic, two-stage power-down feature (APD) resulting in power consumption of less than 2.5 W. The amplifiers also include a remote standby/wake up function, enabling them to be placed into standby mode - and subsequently powered up again - by a simple external contact closure. The APD feature can be disabled by a rear panel DIP switch. Safety features of the design include output DC detection, overcurrent protection, and thermal monitoring. A switch on delay provides loudspeaker protection at power-up. All models use variable–speed forced-air cooling. The 8 channel CA8125 is capable of delivering 1 kW of audio power. In high impedance (70/100V) mode, this maximum power rating can be shared between channels in an intelligent manner, allowing the amplifiers to drive different types or numbers of loudspeakers in the various areas of a building or venue with maximum economy.

The Cloud CA Series is a range of versatile multi-channel audio power amplifiers of advanced design, able to drive low impedance loudspeakers, or high impedance (100 V or 70 V) loudspeaker distribution systems directly. They are ideal for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Particular design attention has been paid to the amplifiers’ energy efficiency. The Class D output stages dispense with line output transformers, and consequently offer great savings in weight and size over earlier designs. An automatic, two-stage power-down feature (APD) resulting in power consumption of less than 2.5 W. The amplifiers also include a remote standby/wake up function, enabling them to be placed into standby mode - and subsequently powered up again - by a simple external contact closure. The APD feature can be disabled by a rear panel DIP switch. Safety features of the design include output DC detection, overcurrent protection, and thermal monitoring. A switch on delay provides loudspeaker protection at power-up. All models use variable–speed forced-air cooling. The 6 channel CA6160 is capable of delivering 1 kW of audio power. In high impedance (70/100V) mode, this maximum power rating can be shared between channels in an intelligent manner, allowing the amplifiers to drive different types or numbers of loudspeakers in the various areas of a building or venue with maximum economy.

The Cloud CA Series is a range of versatile multi-channel audio power amplifiers of advanced design, able to drive low impedance loudspeakers, or high impedance (100 V or 70 V) loudspeaker distribution systems directly. They are ideal for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Particular design attention has been paid to the amplifiers’ energy efficiency. The Class D output stages dispense with line output transformers, and consequently offer great savings in weight and size over earlier designs. An automatic, two-stage power-down feature (APD) resulting in power consumption of less than 2.5 W. The amplifiers also include a remote standby/wake up function, enabling them to be placed into standby mode - and subsequently powered up again - by a simple external contact closure. The APD feature can be disabled by a rear panel DIP switch. Safety features of the design include output DC detection, overcurrent protection, and thermal monitoring. A switch on delay provides loudspeaker protection at power-up. All models use variable–speed forced-air cooling. The 2 channel CA2500 is capable of delivering 1 kW of audio power. In high impedance (70/100V) mode, this maximum power rating can be shared between channels in an intelligent manner, allowing the amplifiers to drive different types or numbers of loudspeakers in the various areas of a building or venue with maximum economy.

The Cloud CA Series is a range of versatile multi-channel audio power amplifiers of advanced design, able to drive low impedance loudspeakers, or high impedance (100 V or 70 V) loudspeaker distribution systems directly. They are ideal for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Particular design attention has been paid to the amplifiers’ energy efficiency. The Class D output stages dispense with line output transformers, and consequently offer great savings in weight and size over earlier designs. An automatic, two-stage power-down feature (APD) resulting in power consumption of less than 2.5 W. The amplifiers also include a remote standby/wake up function, enabling them to be placed into standby mode - and subsequently powered up again - by a simple external contact closure. The APD feature can be disabled by a rear panel DIP switch. Safety features of the design include output DC detection, overcurrent protection, and thermal monitoring. A switch on delay provides loudspeaker protection at power-up. All models use variable–speed forced-air cooling. The 4 channel CA4250 is capable of delivering 1 kW of audio power. In high impedance (70/100V) mode, this maximum power rating can be shared between channels in an intelligent manner, allowing the amplifiers to drive different types or numbers of loudspeakers in the various areas of a building or venue with maximum economy.

The 46-120T 4-Zone Integrated Mixer Amplifier provides individual source selection and volume control of up to six audio sources and two microphone inputs across four zones. Each zone is provided with 120W (4ohm) output or 120W (70/100V) output with internal transformer modules pre-installed. Source selection and volume level control for each zone can be made via the front panel or remotely with the connection of up to four optional RSL-6 / RSL-6A Remote Source / Volume Select controllers, one for each zone. Analogue paging functionality to individual or all zones is available with the optional PM-Series paging microphones. An automatic stand-by function reduces power consumption when not in use and a remote power down function makes the 46/120T suitable for numerous applications in Retail, Leisure, Education and Hospitality. The CDI-46 Optional Digital Interface Module provides digital paging connection via RJ-45, Ethernet Interface (TCP/IP) and RS-232 connection. The 46/120T Mixer Amplifier provides a feature-packed single-box solution for four zone venues of all sizes.