Made from 3mm Galvanised Steel, the ceiling speaker Tile Bridge is primarily used to support ceiling speakers in suspended ceiling tiles, with the tile bridge taking the weight of the speaker and not the ceiling tile. Can also be used as support or bracing in thin plasterboard ceilings.

The Cloud CX261 is a 1U rack-mounting audio mixer ideal for use in bars, restaurants and other leisure sector premises, also offices, hotels and other multi-use areas where simple control of high quality background music needs to be combined with a flexible range of paging options.

The CX263 is the ideal solution for leisure, licensed and retail venues. This compact unit has 6 line level inputs and 2 mic inputs with paging microphone access on Mic 1. The CX263 has one stereo and two mono zones. The line inputs and mics can be independently routed to any output zone via the front panel controls, alternatively the music signals on each zone can be controlled remotely by the RL-1 (level only) or RSL-6 (source and level). Additional remote control functions can be provided by the optional serial interface card (RS232) CDI-S200 shown fitted on the rear panel which can control the music level and source on each zone, access for Mic 1 on each zone, and access for Mic 2 on each zone. This compact unit is easy to install and operate but has the flexibility to provide a solution for many differing environments.

The Cloud CS-S3 is a 3 full range surface mount speaker, offers the industry’s most innovative omnidirectional mounting system. The CS-S3 offer consistent dispersion across broad frequency ranges, available in Black or White and removable logos ensure Cloud speakers can be used discretely or prominently in almost any venue. It is sonically matched with the C series for uniform acoustics and providing aesthetic solutions for Retail, Hospitality, Leisure and Commercial Markets. The CS-SUB8 compliments this model to add deep, impactful bass.

The Cloud CS-C6 is a 6.5 inch coaxial two way in-ceiling loudspeaker featuring exceptional intelligibility and musical performance. Using premium drivers and electronics, the CS-C6 offers high sensitivity, smooth frequency response, and excellent off axis performance. The 6.5 inch woofer incorporates a large magnet structure, a treated paper cone, and a butyl rubber surround for lasting, low distortion performance. The 1.0 inch tweeter is a silk soft dome with a phase plug to smoothly distribute the high frequency energy. The included 32 W transformer provides plenty of power for even high SPL applications. The 16 ohm impedance allows for easy low impedance daisy chaining. The CS-C6 incorporates several innovative features that make it a truly remarkable speaker. The ZeroEdge™ grille is magnetically attached for easy installation, and features a completely seamless transition from grille to ceiling. The entire CS-C series of speakers uses the same diameter back can which simplifies installation, and inventory management with only one size hole to cut, one size grille to install, and one size tile bridge to bring to the job site.

The Cloud CS-CSUB8 is an 8 inch in-ceiling subwoofer featuring deep bass and exceptional musical performance. Using premium drivers and electronics, the CS-CSUB8 offers excellent low frequency reinforcement. The 8.0 inch woofer incorporates a large magnet structure, a treated paper cone, and a butyl rubber surround for lasting, low distortion performance. The included 100 W transformer provides plenty of power for even high SPL applications. The CS-CSUB8 incorporates several innovative features that make it a truly remarkable speaker. The ZeroEdge™ grille is magnetically attached for easy installation, and features a completely seamless transition from grille to ceiling. The entire CS-C series of speakers uses the same diameter back can which simplifies installation, and inventory management with only one size hole to cut, one size grille to install, and one size tile bridge to bring to the job site.

The BE-1 balanced input connector plate provides two balanced inputs for the Cloud DCM-1/DCM-1e Digital Control Zone Mixer. The BE-1 is used to provide local stereo balanced line-level inputs in a zone allowing professional audio equipment such as mixing consoles, DI boxes or broadcast equipment to be connected directly to the Cloud DCM-1/DCM-1e. The BE-1 connects to one of four BE-1 / LE-1 RJ45 input ports on a Cloud DCM-1/DCM-1e via a single screened CAT-5 cable. A maximum of four BE-1 or LE-1 Line Input Modules can be daisy chained together per RJ45 input port on a Cloud DCM-1/DCM-1e.

The VTX card hosts its own website providing monitoring and surveillance information about the amplifier's condition and status - which can be viewed from any remote location at any time using any computer (or PDA, smartphone, etc.) via its normal Internet browser application. With no further software necessary, the VTX card is the simplest and lowest-cost option available. Passwords and criteria are established at point of installation. Monitoring options span load monitoring, input level monitoring, signal level indications, temperature and level controls and all user configurable settings. Alarm warnings and status messages are sent via email (or SMS). This includes a 'Black Box' message should the amplifier fail and shut down: the battery back-up within the card allows it to send a final message and its settings. The VTX-WM1, like the VTX amplifier range, is covered by the Cloud five-year warranty, guaranteeing complete peace of mind.

The Cloud VMA120 is a cost-effective mixer-amplifier for use in all types of commercial premises. IT has been designed to be as simple to install and operate as possible, but offer a useful range of features and configuration options. The units is a 120 W mono power amplifiers combined with a simple mixer stage. It may be used to drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V loudspeaker distribution systems. The two different types of speaker system cannot be driven simultaneously. A high-pass filter, selectable by internal jumper, minimises the effect of transformer saturation at low frequencies when driving 25/70/100 V-line systems. VMA120 has four stereo line inputs (typically for connection of music sources), including an AUX input in the form of a 3.5 mm jack socket on the front panel to permit the easy connection of laptops, tablets and similar devices. Two balanced microphone inputs are also provided: phantom power is available at each, selectable by internal jumper. A high-pass filter for each mic input may also be selected by internal jumper: this reduces the effects of handling and breath noise. All mic and line inputs (except the AUX input) have a preset-type gain control adjacent to the input connectors on the rear panel. The front panel has rotary controls for line input selection, music level, the level of each mic input, and LF/HF EQ adjustment for the summed mic inputs. Two switches enable priority options: one allows the mic inputs to have priority over music sources to permit announcements, the other gives one line input priority over all others: this is useful for connecting a jukebox or message store, for example. Two further switches enable/disable each mic input. The front panel controls also include a master level control and HF/LF EQ adjustment for the main output. The rear panel has a music mute control input which can be used to mute all music sources in an emergency: an internal jumper allows this to also mute the mic inputs if wished. There is also a balanced auxiliary output to allow additional power amplifiers to be slaved.

The Cloud VMA240 is a cost-effective mixer-amplifier for use in all types of commercial premises. IT has been designed to be as simple to install and operate as possible, but offer a useful range of features and configuration options. The units is a 240 W mono power amplifiers combined with a simple mixer stage. It may be used to drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V loudspeaker distribution systems. The two different types of speaker system cannot be driven simultaneously. A high-pass filter, selectable by internal jumper, minimises the effect of transformer saturation at low frequencies when driving 25/70/100 V-line systems. VMA240 has four stereo line inputs (typically for connection of music sources), including an AUX input in the form of a 3.5 mm jack socket on the front panel to permit the easy connection of laptops, tablets and similar devices. Two balanced microphone inputs are also provided: phantom power is available at each, selectable by internal jumper. A high-pass filter for each mic input may also be selected by internal jumper: this reduces the effects of handling and breath noise. All mic and line inputs (except the AUX input) have a preset-type gain control adjacent to the input connectors on the rear panel. The front panel has rotary controls for line input selection, music level, the level of each mic input, and LF/HF EQ adjustment for the summed mic inputs. Two switches enable priority options: one allows the mic inputs to have priority over music sources to permit announcements, the other gives one line input priority over all others: this is useful for connecting a jukebox or message store, for example. Two further switches enable/disable each mic input. The front panel controls also include a master level control and HF/LF EQ adjustment for the main output. The rear panel has a music mute control input which can be used to mute all music sources in an emergency: an internal jumper allows this to also mute the mic inputs if wished. There is also a balanced auxiliary output to allow additional power amplifiers to be slaved.

The Cloud VA4120 is a cost-effective audio power amplifier for use in all types of commercial premises. It has been designed to be as simple to install and operate as possible. The VA4120 has four channels with 120 W output power each. The amplifier can drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V loudspeaker distribution systems. The amplifiers incorporates a limiter in each channel to protect the output stage and connected loudspeakers: this reduces excessive signal levels to ensure that clipping does not occur. Further protection circuitry disconnects the output if the maximum permitted internal temperature is exceeded, or if DC is detected at the output terminals. All connections and controls are on the rear panel. Each channel has a preset level control and a switchable high-pass filter to mitigate the effect of transformer saturation at low frequencies when driving 25/70/100 V systems. The front panel has a set of LEDs for each channel, confirming signal presence, excessive level and amplifier protection activity. Both models are forced-air cooled by fans mounted on the rear panel.

The Cloud VA2120 is a cost-effective audio power amplifier for use in all types of commercial premises. It has been designed to be as simple to install and operate as possible. The VA2120 has two channels with 120 W output power each. The amplifier can drive either low-impedance loudspeakers directly (4 ohms minimum) or 25/70/100 V loudspeaker distribution systems. The amplifiers incorporates a limiter in each channel to protect the output stage and connected loudspeakers: this reduces excessive signal levels to ensure that clipping does not occur. Further protection circuitry disconnects the output if the maximum permitted internal temperature is exceeded, or if DC is detected at the output terminals. All connections and controls are on the rear panel. Each channel has a preset level control and a switchable high-pass filter to mitigate the effect of transformer saturation at low frequencies when driving 25/70/100 V systems. The front panel has a set of LEDs for each channel, confirming signal presence, excessive level and amplifier protection activity. Both models are forced-air cooled by fans mounted on the rear panel.

The RL-1B remote control plate can be wired to a wide range of Cloud products and overs remote music level control of one or multible zones.

Optional 19 Rackmount kit for fitting 1x MA60 or MA60Media Mixer Amplifiers into a standard 19 Rack.

Optional 19 Rackmount kit for fitting 2x MA60 or MA60Media Mixer Amplifiers into a standard 19 Rack.

The PM Range of Paging Microphones are designed for general purpose multizone applications and can also be used with non-Cloud products. Four models of the PM are available: the PM4, PM8, PM12 and PM16. The models differ only in the number of zone select buttons on the front panel (4, 8, 12 or 16 respectively), and consequently in the maximum of zones that can be supported. The PM is designed to interface directly with recent Cloud products - such as the DCM1 - via the Cloud Digital Paging Interface, which uses standard CAT-5 cable and RJ45 connectors. The PM is also compatible with the older Cloud CDPM range of digital paging microphones. PM microphones and CDPM microphones may be freely intermixed on the Digital Paging Interface.

The Cloud MX155 is a cost-effective, rackmounting (1U) stereo audio mixer for use in all types of commercial premises. It is simple to install and operate and provides a useful range of features and configuration options. The mixer has five primary channels, each of which has a balanced mic input and an unbalanced stereo line input: all connections are on the rear panel. There is a further stereo auxiliary line input, with both a balanced rear panel input and an unbalanced 3.5 mm TRS jack on the front panel allowing easy connection of tablets, laptops, etc. An additional, independent mic input channel is also routed to the main output; this channel features adjustable VOX detection to allow paging use, with voice-over-programme ducking. VOX threshold is adjustable via a rear panel preset control and the depth of ducking adjustable from the front panel. The front panel provides level and HF/LF EQ controls for each of the five main channels and the mic channel; a level control for the auxiliary line input is also fitted. 15 V phantom power is available at all mic inputs, selected by internal jumpers. The stereo output of the mixer is balanced: the front panel has an output level control and an LED bargraph meter. A rear panel switch converts the output for mono operation. Headphone monitoring of the main output is available on the front panel, with an independent headphone volume control. Installers can set the maximum level of the main output via a rear panel preset control, to prevent inadvertent overloading of power amplifiers or damage to loudspeakers. The mixer has an additional unbalanced stereo line output carrying the main mix: VOX ducking affects this output, but the level is independent of the master output level control. To aid compliance with PA-VA regulations, the MX155 has a dedicated emergency input (balanced): when a signal is detected at this input, all other inputs are muted and the emergency input routed directly to the mixer output. An internal jumper determines whether the mic channel should remain unmuted in this situation; this allows it to be used for announcements in an emergency. In common with most other Cloud products, a Music Mute control input is fitted; short-circuiting the terminals here will also activate the emergency muting circuitry.

The Cloud MX141M is a cost-effective, rackmounting (1U) stereo audio mixer/media player ideal for use in all types of commercial premises. It is simple to install and operate and provides a useful range of features and configuration options. It combines an audio mixer for one of four stereo music sources plus a microphone: one of the music sources is an on-board media player which incorporates both Bluetooth® wireless technology and an FM tuner. The MX141M is supplied with an infrared remote control for the media player functions and is the perfect centrepiece for commercial sound systems in hospitality and fitness centre applications. The mixer has three unbalanced pairs of line inputs for external stereo music sources with connections on the rear panel: Input 1 also has a 3.5 mm TRS jack input on the front panel allowing easy connection of tablets, laptops, etc. Input 2 is dedicated to the internal media player/FM tuner. Input 4 is provided with an alternative, balanced pair of inputs, to permit the unit to be fed from a mixing console or other part of a separate sound system. A front panel switch selects the active line input. The MX141M has a single mic input on the front panel in the form of a “Combi type” socket which can accept either XLR or ¼” TRS jack plus. The mic signal is mixed with the selected music source; controls for level, mic on/off and HF/LF EQ are on the front panel. 12 V phantom power is available at the mic input, enabled by an internal jumper. The stereo output of the unit is available on the rear panel in balanced form on both a plug-in multipin connector and two ¼” TRS jack sockets, and also in unbalanced form on a pair of phono sockets (RCA jacks). The front panel has an output level control, HF/LF EQ adjustment and an LED bargraph meter. Installers can set the maximum level of the main outputs via a rear panel preset control, to prevent inadvertent overloading of power amplifiers or damage to loudspeakers. The unit also has an additional unbalanced stereo line output carrying the pre-fade main mix signal. The MX141M’s integral media player plays MP3 files from FAT32-formatted USB memory sticks of up to 16 GB capacity. Most common sample rates from 128 kbps to 320 kbps are allowed and up to 2,000 files can be handled. A multifunction alphanumeric LCD display and a simple set of front panel controls allow folder navigation, file selection, random/sequential play mode and most other standard player functions. The media player will also stream stereo audio from compatible devices using Bluetooth wireless technology. A Bluetooth antenna (aerial) is included with the unit: this is plugged into a front panel socket. The media player also incorporates an FM tuner with nine station memories. An FM aerial socket is fitted to the rear panel. To aid compliance with PA-VA regulations, the MX141M has a dedicated emergency input (balanced): when a signal is detected at this input, all other inputs are muted and the emergency input routed directly to the mixer output. An internal jumper determines whether the mic channel should remain unmuted in this situation; this allows it to be used for announcements in an emergency. In common with most other Cloud products, a Music Mute control input is fitted; short-circuiting the terminals here will also activate the emergency muting circuitry.

The Cloud MPA120MK2 is intended to provide a complete audio solution for Houses of Worship, retail outlets, hotels, licensed premises and other spaces where music, announcements and/or flexible paging are required. It combines the functions of a two-channel microphone mixer with full paging facilities, a six-input music source selector and a mono power amplifier in a single 1U unit. The MPA120MK2 has six unbalanced stereo line inputs for music sources, and two balanced microphone inputs. Each microphone input has its own rear panel sensitivity control and front panel gain control, allowing multiple mics to be mixed together. The selected music source is mixed with the summed mic signals before being fed to the power amplifier stage. The MPA120MK2 is compatible with the Cloud PM1 single-zone paging microphone, and may also be used for one of the zones supported by the Cloud PM4/8/12/16/4-SA/8-SA multizone paging microphones. The power output stage is transformerless, and is capable of driving 70/100 V loudspeaker distribution systems directly. Rear panel DIP switches allow the output voltage and impedance to be selected, permitting the amplifier to be used to either drive low-impedance (4 or 8 ohm) loudspeakers or 70/100 V systems. A particularly useful feature of the MPA120MK2 is the Facility Port; this allows a remote input module from the Cloud LM-2 Series (for wired sources) or BT-1 Series (for Bluetooth wireless sources) to be connected via easy-to-install screened Cat 5 cable. Microphones, and/or line sources such as radio mics, DJ mixers, MP3 players, laptops or other audio sources – including Bluetooth-equipped laptops, tablets and smartphones – can then be connected locally, simplifying the use of the area for presentations where portable audio sources are in use.

The Cloud MPA240MK2 is intended to provide a complete audio solution for Houses of Worship, retail outlets, hotels, licensed premises and other spaces where music, announcements and/or flexible paging are required. It combines the functions of a two-channel microphone mixer with full paging facilities, a six-input music source selector and a mono power amplifier in a single 1U unit. The MPA240MK2 has six unbalanced stereo line inputs for music sources, and two balanced microphone inputs. Each microphone input has its own rear panel sensitivity control and front panel gain control, allowing multiple mics to be mixed together. The selected music source is mixed with the summed mic signals before being fed to the power amplifier stage. The MPA240MK2 is compatible with the Cloud PM1 single-zone paging microphone, and may also be used for one of the zones supported by the Cloud PM4/8/12/16/4-SA/8-SA multizone paging microphones. The power output stage is transformerless, and is capable of driving 70/100 V loudspeaker distribution systems directly. Rear panel DIP switches allow the output voltage and impedance to be selected, permitting the amplifier to be used to either drive low-impedance (4 or 8 ohm) loudspeakers or 70/100 V systems. A particularly useful feature of the MPA240MK2 is the Facility Port; this allows a remote input module from the Cloud LM-2 Series (for wired sources) or BT-1 Series (for Bluetooth wireless sources) to be connected via easy-to-install screened Cat 5 cable. Microphones, and/or line sources such as radio mics, DJ mixers, MP3 players, laptops or other audio sources – including Bluetooth-equipped laptops, tablets and smartphones – can then be connected locally, simplifying the use of the area for presentations where portable audio sources are in use.

The ME-1 microphone input connector plate provides two balanced microphone inputs for the Cloud DCM-1 and DCM-1e Digital Control Zone Mixers. The ME-1 is useful where microphone inputs are required locally in a zone and offers adjustable mic level and adjustable EQ per input. Each microphone input per ME-1 is mixed at the ME-1 plate and the summed output signal of both microphone inputs is routed to the Cloud DCM-1/DCM-1e. The ME-1 connects to one of four dedicated ME-1 input ports on a Cloud DCM-1/DCM-1e via a single screened CAT-5 cable. Up to four ME-1 microphone Input plates can be daisy chained together per input port on a Cloud DCM-1/DCM-1e.

The MA60 is an exciting new development from Cloud Electronics, combining for the first time the proven versatility of Cloud mixer-amplifiers in a single compact (2U, half-rack width) unit, and at a very competitive price point. The MA60 will find many applications in the Retail, Hospitality, Licensed Premises and other entertainment markets and is the most feature rich of the Utility Mixer/Amps on the market which also offers the best sound quality and the traditional Cloud reliable. Single Zone, 60w, 4Ohm Output as Standard with Optional 70/100v Internal Transformer (CXL-60T)